RIDGID R83001 manual LED Function of Charger, Full Indicator

Page 11

OPERATION

LED FUNCTION OF CHARGER

See Figure 3.

LED

BATTERY

RED

GREEN

ACTION

INDICATOR

PACK

LED

LED

 

Power

Without battery pack

ON

OFF

Ready to charge battery pack

Evaluate

Hot battery pack

Flashing

OFF

When battery pack reaches

 

 

 

 

cooled temperature, charger

 

 

 

 

begins fast charge mode

Evaluate

Cold battery pack

Flashing

OFF

When battery pack reaches

 

 

 

 

warmed temperature, charger

 

 

 

 

begins fast charge mode

Evaluate

Deeply discharged

Flashing

OFF

Charger pre-charges battery

 

 

 

 

until normal voltage is reached,

 

 

 

 

then begins fast charge mode

Evaluate

Thermistor shorted

Flashing

OFF

If red LED continues flashing for

 

or open

 

 

more than 90 minutes, and

 

 

 

 

green LED remains off, this may

 

 

 

 

indicate a damaged battery

Charging

Fast charging

ON

Flashing

Fast charges in 30 minutes

Full

Slow charging

OFF

ON

Fast charging is complete.

 

 

 

 

Charger maintains charge mode.

POWER INDICATOR

EVALUATE INDICATOR

CHARGING INDICATOR

FULL

INDICATOR

Note: The 9.6 Volt, 12 Volt, and

14.4volt battery packs will not slide all the way down onto the charger port. Insert 9.6 Volt, 12 Volt, and 14.4 Volt battery packs until they click into place and are aligned with the line on the charger, shown at left.

Allow up to 5 seconds for the “charge” light to come on after the battery pack is inserted.

Fig. 3

11

Image 11
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyAdditional Rules for Safe Operation Specific Safety RulesImportant Rules for Battery Tools Important Safety Instructions for Charger Symbol Meaning SymbolsSymbol Name DESIGNATION/EXPLANATION Instructions SpecificationsUnpacking ApplicationsFeatures Torque Adjustment Ring Keyless Chuck Operation Charging Battery PackImportant Information for Recharging HOT Battery Pack Importantinformationforrecharging Cool Battery PackLED Function of Charger Full IndicatorVariable Speed To Install Battery PackTo Remove Battery Pack TWO Speed Gear Train HI-LO Handle Assembly Toloosen TightenReversible TWO-SPEED Gear TrainUnlock Release Lock Tighten Wrong Installing BitsRemoving Bits To Increase Torque BIT Storage Area Screwdriver BIT Adjustable Torque ClutchTo Adjust Torque Drilling Mallet Chuck Jaws HEX KEY Keyless Screwdriver MaintenanceChuck Removal To Retighten a Loose ChuckBatteries Battery Pack Removal and Preparation for RecyclingGeneral HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyCustomer Service Information