RIDGID R83001 manual Adjustable Torque Clutch, To Adjust Torque

Page 15

OPERATION

ADJUSTABLE TORQUE CLUTCH

This drill is equipped with an adjustable torque clutch for driving different types of screws into different materials. The proper setting depends on the type of material and the size of screw you are using.

TO ADJUST TORQUE

TO DECREASE

ADJUSTING

TORQUE

RING

nIdentify the twenty four torque indicator settings located on the front of the drill. See Figure 11.

nRotate adjusting ring to the desired setting.

•1 - 4 For driving small screws.

•5 -8 For driving screws into soft material.

•9 -12 For driving screws into soft and hard materials.

•13 -16 For driving screws in hard wood.

•17 - 20 For driving large screws.

•21 - For heavy drilling.

BIT STORAGE

See Figure 12.

When not in use, the bit provided with this drill can be placed in the storage area located on the rear of the drill.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

TO INCREASE

TORQUE

BIT STORAGE AREA

Fig. 11

SCREWDRIVER BIT

Fig. 12

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetySpecific Safety Rules Important Rules for Battery ToolsAdditional Rules for Safe Operation Important Safety Instructions for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONSymbol Meaning Instructions SpecificationsUnpacking ApplicationsFeatures Torque Adjustment Ring Keyless Chuck Operation Charging Battery PackImportant Information for Recharging HOT Battery Pack Importantinformationforrecharging Cool Battery PackLED Function of Charger Full IndicatorTo Install Battery Pack To Remove Battery PackVariable Speed TWO Speed Gear Train HI-LO Handle Assembly Toloosen TightenReversible TWO-SPEED Gear TrainInstalling Bits Removing BitsUnlock Release Lock Tighten Wrong Adjustable Torque Clutch To Adjust TorqueTo Increase Torque BIT Storage Area Screwdriver BIT Drilling Mallet Chuck Jaws HEX KEY Keyless Screwdriver MaintenanceChuck Removal To Retighten a Loose ChuckBattery Pack Removal and Preparation for Recycling GeneralBatteries HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyCustomer Service Information
Top Page Image Contents