RIDGID manual Customer Service Information, Model No R5011 Serial No

Page 20

983000-914

08-07-06 (REV:00)

OPERATOR’S MANUAL

1/2 in. HAMMER DRILL

DOUBLE INSULATED

R5011

Customer Service Information:

For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space provided below. When ordering repair parts, always give the following information:

Model No.

R5011

Serial No.

 

20

Image 20
Contents OPERATOR’S Manual Double InsulatedTable of Contents IntroductionGeneral Safety Rules Work Area SafetyElectrical Safety Personal SafetySpecific Safety Rules ServiceSymbols Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Cord Length Wire Size A.W.G ElectricalDouble Insulation Electrical ConnectionFeatures Product SpecificationsChuck Lighted PlugAssembly Installing Auxiliary Handle Assembly Installing the Depth Stop RODSwitch Trigger OperationApplications LOCK-ON ButtonTo Install Bits Using the Auxiliary Handle AssemblyTWO-SPEED Gear Shift Knob To Remove BitsAdjusting the Depth Stop ROD Selecting Hammer Mode or DrillingTo adjust the auxiliary handle assembly Drilling ModeDrilling To lock-onMaintenance Mallet Chuck Jaws HEX KEY Screwdriver Chuck RemovalTo Retighten a Loose Chuck Warranty DAY Satisfaction Guarantee PolicyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredPage Page Customer Service Information Model No R5011 Serial No