RIDGID R5011 manual Assembly

Page 9

FEATURES

KNOW YOUR HAMMER DRILL

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

ANTI-VIBRATION SYSTEM

The anti-vibration system absorbs hammer impacts during operation.

AUXILIARY HANDLE ASSEMBLY

The drill is equipped with an auxiliary handle assembly for ease of operation and to prevent loss of control.

BLOWS PER MINUTE

This tool features an impact speed of 0-19,000/0-57,000 BPM (Blows Per Minute). Blows Per Minute is the number of impacts per minute.

CHUCK KEY

A chuck key has been provided for use when installing or removing bits and removing the chuck. When not in use, the chuck key can be placed in the chuck key holder.

CLUTCH

This drill features a clutch that limits the amount of torque transferred to the user. With an excessive load, the clutch will slip and make a ratcheting sound. The clutch disengages the bit from the gear train to reduce the chance of damage to the tool or of causing the user to lose control.

DEPTH STOP ROD

A depth stop rod has been supplied with this product to assist in controlling the depth of drilled holes.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE)

The drill has a direction of rotation (forward/reverse) selector located above the switch trigger for changing the direction of bit rotation.

LIGHTED PLUG

The lighted plug with tool icon helps to easily identify live tools.

LOCK-ON BUTTON

The lock-on button is convenient for continuous drilling for extended periods of time.

TWO-SPEED GEAR TRAIN

The two-speed gear train is designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on the side of your drill for selecting either LO (1) or HI (2) speed. Use low speed for high torque and high speed for faster operation during low torque applications.

VARIABLE SPEED

The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

ASSEMBLY

UNPACKING

This product requires assembly.

Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call 1-866-539-1710 for assistance.

PACKING LIST

Hammer Drill

Depth Stop Rod

Auxiliary Handle

Tool Bag

Chuck Key

Cord Wrap

Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

Do not connect to power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury.

9

Image 9
Contents Double Insulated OPERATOR’S ManualIntroduction Table of ContentsWork Area Safety General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Electrical Cord Length Wire Size A.W.GDouble Insulation Electrical ConnectionProduct Specifications FeaturesChuck Lighted PlugAssembly Installing the Depth Stop ROD Installing Auxiliary Handle AssemblyOperation Switch TriggerApplications LOCK-ON ButtonUsing the Auxiliary Handle Assembly To Install BitsTWO-SPEED Gear Shift Knob To Remove BitsSelecting Hammer Mode or Drilling Adjusting the Depth Stop RODTo adjust the auxiliary handle assembly Drilling ModeTo lock-on DrillingMaintenance Chuck Removal To Retighten a Loose ChuckMallet Chuck Jaws HEX KEY Screwdriver DAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredPage Page Model No R5011 Serial No Customer Service Information