RIDGID R250SFA manual Customer Service Information

Page 20

OPERATOR’S MANUAL

STRAIGHT FINISH NAILER

R250SFA

Customer Service Information:

For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com.

The model number of this tool is found on a plate attached to the the magazine. Please record the serial number in the space provided below. When ordering repair parts, always give the following information:

Model No.	R250SFA

Serial No.

983000-612
3-30-06 (REV:01)	20

Image 20

Contents OPERATOR’S Manual R250SFATable of Contents IntroductionGeneral Safety Rules Personal SafetyService Work AreaSpecific Safety Rules OperationAIR Supply and Connections Loading ToolSymbols Symbol Name DESIGNATION/EXPLANATIONGlossary of Terms Activate operating controlsFeatures Product SpecificationsAdjustable Exhaust Depth of Drive AdjustmentQUICK-CONNECT Swivel Connector Know Your Finish NailerAssembly OperationUnpacking Packing ListAdjusting the Exhaust Preparing the Tool for USEConnecting the Tool to AN AIR Supply Loading the Tool with Nails See Figures 6Contact Actuation Mode Using the Selectable TriggerSingle Sequential Actuation Mode Removing Nails from the Tool Setting the AIR PressureDrive Depth Adjustment Clearing a Jammed Fastener Maintenance AccessoriesTroubleshooting Problem Possible Cause SolutionWarranty Customer Service Information