RIDGID AC9940 manual Extension Bars Operation, See Figures 10, Adjustable Handle Locking PIN Knob

Page 10

ASSEMBLY

EXTENSION BAR(S) OPERATION

See Figures 10 and 11.

Both extension bars may be adjusted to provide maximum workpiece support. To adjust the extension bars:

n Loosen adjustable handle by turning counter clockwise.

NOTE: Adjustable handle can be repositioned if necessary. Lift up on handle and rotate to desired position then release handle.

nSlide out extension bar to desired position and tighten extension bar handle.

ADJUSTABLE

HANDLE

LOCKING PIN

KNOB

Fig. 10

NOTE: There is a catch to limit the overall extension bar travel.

nPull out on locking pin knob and swing leg down until locking pin locks leg in the down position.

nTurn foot knob counterclockwise to loosen and slide foot extension down until foot contacts the floor. Tighten foot knob.

nRepeat for the other extension bar.

NOTE: It may be necessary to realign roller assemblies with the miter saw table. See Mounting and Aligning Roller Assembly on page 9.

LEG

FOOT

KNOB

Fig. 11

10

Image 10

Contents OPERATOR’S Manual Table of Contents IntroductionRules for Safe Operation Read ALL InstructionsSymbols Safety and International SymbolsLoose Parts UnpackingTools Needed Mounting Wheels AssemblyAttaching the Lower Foot See Figures 1Before You Start Setting UPWorkstand SET-UP See Figures 4Pound Miter SAW Mounting Miter SAWMounting Ridgid 10 in. and 12 in. COM Ridgid Mounting HolesCenter the Miter SAW on the Workstand Mounting and Aligning Roller AssemblyMounting Other Brands Check and make sureSee Figures 10 Adjustable Handle Locking PIN KnobExtension Bars Operation LEG Foot KnobSee Figures 12, 13 Folding and Moving WorkstandFolding LEG and Table LowerTransporting Tool MaintenanceKeep Area Clean Lubricated See Figures 16Exploded VIEW/REPAIR Parts Miter Saw Utility Vehicle Model AC99400Page What is Covered Under the 3 Year Limited Service Warranty WarrantyDAY Satisfaction Guarantee Policy HOW to Obtain Service What is not CoveredCustomer Service Information