ASSEMBLY
TRANSPORTING TOOL
See Figure 15.
nWhen hauling the workstand in a vehicle, securely tie it down to prevent movement and possible damage.
nAlways get help if you need to lift the workstand. When lifting, hold the workstand close to your body. Bend your knees so you can lift with your legs, not your back.
Fig. 15
MAINTENANCE
See Figures 16 and 17.
n Periodically clean the sliding roller tracks as shown below.
nAlso clean and lubricate the locking handle.
KEEP AREA
CLEAN
Fig. 16
KEEP AREA
CLEAN AND
LUBRICATED
WARNING:
To reduce the risk of injury from the miter saw moving or falling off stand, always check that all mounting bolts and nuts are securely tightened before moving stand or using tool.
WARNING: |
| |
To avoid serious personal injury when lifting, bend | Fig. 17 | |
your knees so you can lift with your legs, not your | ||
| ||
back. |
|
CAUTION:
Do not lift by any part of the miter saw that is attached to the workstand. Failure to do so may result in possible injury and damage the tool.
12