Installation Instructions |
IMPORTANT WARNINGS and CAUTIONS!
WARNING | A WARNING alerts you to the possibility of serious injury or death if you do not follow the |
| instructions. |
|
|
CAUTION | A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow |
| the corresponding instructions. |
|
|
WARNING | Improper installation can result in serious personal injury! Make sure that the mounting surface |
| can support a redundant weight factor five times the total weight of the equipment: if not, |
| reinforce the mounting surface structural members before installing the mount. |
|
|
WARNING | Be aware of the potential for personal injury or damage to the equipment if it is not adequately |
| mounted. |
|
|
WARNING | The installer is responsible for verifying that the mounting surface to which the |
| anchored will safely support the combined load of all attached components or other equipment. |
|
|
WARNING | The combined weight of the TV/monitor and all attached components and equipment placed on a |
| Chief Wall Arm must not exceed the maximum support weight specified in Table 1 (see page 2). |
|
|
WARNING | Watch for pinch points. Do not put your fingers between movable parts. |
|
|
CAUTION | Check the unit for shipping damage before you begin the installation. |
|
|
CONTENTS |
|
2 | |
CONTENTS | 3 |
INSPECT THE UNIT BEFORE INSTALLING | 3 |
PARTS | 4 |
TOOLS REQUIRED FOR INSTALLATION | 5 |
INSTRUCTIONS | 5 |
Installing Wall Arm | 5 |
Attaching Front Cover | 6 |
Connecting NPT Pipe or Nipple to Wall Arm | 6 |
INSPECT THE UNIT BEFORE INSTALLING
Unpack the carton. Carefully inspect the parts for shipping damage. Verify contents listed in Table 2.
If you are missing any of the listed parts, contact Customer Service at:
Table 2. Shipping Contents
ITEM | DESCRIPTION | QTY |
10 | Wall Arm | 1 |
20 | Front Cover | 1 |
30 | 5/16 X 2.5” Lag Bolt | 2 |
40 | 5/16 Flat Washer | 2 |
50 | M4 X 8mm Phillips Head Cap Screw | 4 |
60 | M6 X 6mm Set Screw | 1 |
70 | M3 Allen Key | 1 |
3