A1301 and
A1302
Continuous-Time Ratiometric Linear Hall Effect Sensors
Package UA, 3-Pin SIP
.164 4.17
.159 4.04
|
|
| D .0805 2.04 | .062 | 1.57 | |
|
|
| NOM | .058 | 1.47 | |
.122 | 3.10 | .0565 | 1.44 | D |
|
|
NOM | D |
|
|
| ||
.117 | 2.97 |
|
|
|
|
|
|
|
|
| B |
|
|
|
| .085 | 2.16 | .031 | 0.79 | |
|
| MAX |
| |||
|
|
| REF |
| ||
|
|
|
|
| ||
|
|
| A |
|
|
|
C
.640 16.26
.600 15.24
1 2
.019 0.48
.014 0.36
.017 0.44
.014 0.35
3
.050 1.27
NOM
Dimensions in inches
Metric dimensions (mm) in brackets, for reference only
ADambar removal protrusion (6X)
BEjector mark on opposite side
CActive Area Depth .0195 [0.50] NOM
DHall element (not to scale)
The products described herein are manufactured under one or more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283; 5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719; 5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components in
The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor for any infringement of patents or other rights of third parties which may result from its use.
Copyright © 2005, 2006 Allegro MicroSystems, Inc.
Allegro MicroSystems, Inc. | 8 |
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts