Viii Connecting to PC | Oregon Scientific atc-2k guide

Available Recording Time

The available recording time is an approximation. (These vary depending on the recording conditions and the type of card.

Picture quality		VGA	VGA	QVGA	QVGA	QQVGA	QQVGA
setting		30 fps	15 fps	30 fps	15 fps	30 fps	15 fps
Internal	32 MB	52 s	1 min 20 s	1 min 36 s	3 min 14 s	5 min	11 min 10 s
Memory	32 MB	52 s	1 min 20 s	1 min 36 s	3 min 14 s	5 min	11 min 10 s
Memory


	32 MB	52 s	1 min 20 s	1 min 36 s	3 min 14 s	5 min	11 min 10 s

	64 MB	2 min	3 min	4 min	7 min	11 min	25 min

SD	128 MB	4 min	6 min	7 min	14 min	23 min	50 min


Memory	256 MB	8 min	12 min	14 min	28 min	45 min	99 min
Card	256 MB	8 min	12 min	14 min	28 min	45 min	99 min
Card
	512 MB	15 min	24 min	28 min	57 min	89 min	198 min

VIII) Connecting to PC

You can acquire recorded video footage from a PC by connecting the ATC-2K to the PC. Connect your camera to your PC using the USB cable. This enables you to download your video footage to your PC.

1.Turn on ATC-2K.

2.Connect ATC-2K to a PC via the USB cable.

3. “PC” appears on the ATC-2K screen, which means ATC-2K is connected to your PC.

4.The ATC-2K drive appears in the [My Computer] folder.

*If you are connecting the camera to a PC for the first time, the required driver is installed automatically so that the camera can be recognized by Windows Plug and Play. The ATC-2K drive then appears on the [My Computer] folder.

5.Open the '100COACH' folder in the [DCIM] folder to start selecting your desired video files. Copy the desired video to your PC.

• Folder Composition