Omega FCLTX-100 Section Sensor Specification, FC72 Flow Cell Dimensions, Technical Specifications

SECTION 12.0

SENSOR SPECIFICATION

12.1OPERATING SPECIFICATIONS. Follow all operating specifications, especially for pH and flow rate as noted in the specification tables below.

	TECHNICAL SPECIFICATIONS
SENSOR
Dimensions:	8.2"L x 1" dia
Body Material:	Black PVC
Membrane Material:	polyethersulfone
O-ring material:	VitonR
Cathode:	Gold
Anode:	Silver chloride (AgCl)
Cable:	2 -conductor shielded, 10ft (3mtr)
	tinned wire leads
FLOW CELL
Dimensions:	5.58"H x 2.25"DIA
Material:	Acrylic
Connections:	1/4" NPT inlet and outlet
	OPERATING SPECIFICATIONS

PRODUCT INSTRUCTION SHEET

FC72 FLOW CELL DIMENSIONS

Operating temperature range: Maximum operating pressure: Flow rate minimum:

Flow rate maximum: pH range:

Output signal:

Power Requirement:

Cross-Sensitivity:

Chemical Compatibility:

0-45 degC

1 bar/14.7 psi/1atm

.20 gpm

0.6ppm

5.5-9.0

4.0+/- 0.2mA in air (zero) 20mA +/- 0.2mA at high range (2, 5 or 10ppm)

12-24 VDC, 250 mA minimum ClO2, ozone, bromine

up to 50% ethanol/water or up to 50% glycerol/water

SENSOR AND FLOW CELL INSTALLATION DIMENSIONS

	MAINTENANCE/REPLACEMENT PARTS
FC72	Flow Cell, 1/4 inch FNPT inlet and outlet, includes:
	2 each 1/4" barbed tube fittings, clamp, threaded
	flow cell installation fitting
FCL-ES	Free Chlorine sensor fill solution, 30mL, 1 each
FCL-RM	FCL Replacement premembraned cap, 1 each

M4679/0708 page 6 of 6

Parts covered by this product instruction sheet include: FCLTX-100 Series