READ THIS MANUAL COMPLETELY BEFORE ATTEMPTING TO CONNECT OR OPERATE YOUR FLOW SENSOR. FAILURE TO DO SO MAY RESULT IN INJURY TO YOU OR DAMAGE TO THE FLOW SENSOR.
T A B L E O F C O N T E N T S
A. | Introduction | 4 | |
| 1. | Unpacking | 4 |
| 2. | Product Overview And Principle Of Operation | 4 |
B. | Installation | 5 | |
| 1. | General Considerations | 6 |
| 2. | Mounting the Flow Sensor or Flow Meter | 6 |
| 3. | Tubing Connections | 7 |
| 4. | Electrical Connections | 8 |
|
| a) Overview | 8 |
|
| b) Connecting a Cable Assembly | 9 |
|
| c) Electrical Connections - Voltage Output Units | 10 |
|
| d) Using a | 11 |
C. | Operation | 12 | |
| 1. |
| 12 |
| 2. | Flow Readings | 12 |
|
| a) | 12 |
|
| b) Units with an Integral Display | 12 |
| 3. | Operating at Flow Rates Outside the Calibrated Flow Range | 13 |
|
| a) Flows Above the Maximum Rated Flow | 13 |
|
| b) Flows Below the Maximum Rated Flow | 13 |
| 4. | Zero Adjustments | 14 |
| 5. | Recalibration | 14 |
| 6. | Using Flow Sensors or Flow Meters with Different Gases | 14 |
D. | Maintenance And Product Care | 16 | |
| 1. | General | 16 |
| 2. | Cleaning and Flushing | 16 |
| 3. | Returning Units For Repair Or Recalibration | 16 |
E. | Specifications | 17 | |
F. | Connector Pin and Wire Color Cross Reference | 18 | |
G. | Dimensions | 19 | |
H. | Trouble Shooting Guide | 26 | |
pg. 3 of 29