BP7315 Florissant 3/7/06 8:42 AM Page 16
!WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN.
Trouble Shooting
| TROUBLE |
| PROBABLE CAUSE |
| SUGGESTED REMEDY |
|
|
|
|
| |
1. | Fan will not | 1. Fuse or circuit breaker | 1. | Check main and branch circuit fuses | |
| start. |
| blown. |
| or circuit breakers. |
|
|
|
| ! | WARNING: Make sure main power |
|
|
|
|
| is turned off. |
|
| 2. | Loose power line | 2. | Check line power connections to fan. |
|
|
| connections to the fan |
|
|
|
| 3. | Fan/Light Wall Control is OFF. | 3. | Turn ON Fan/Light Wall Control. |
|
| 4. | Code switches in remote control | 4. | Check that both code switches |
|
|
| receiver and Fan/Light Wall Control |
| are set in the same positions. |
|
|
| are not set in the same position |
|
|
|
|
|
| ||
2. Fan sounds | 1. Screws securing fan blade | 1. | Check to make sure the | ||
| noisy. |
| flanges to motor hub are |
| screws which attach the |
|
|
| loose. |
| blade flanges to the motor |
|
|
|
|
| hub are tight. |
|
| 2. | Screws holding blades to | 2. | Tighten screws securely. |
|
|
| flanges are loose. |
|
|
|
|
|
|
| |
3. | Fan wobbles | 1. Screws securing fan blade | 1. | Check to be sure screws | |
|
|
| flanges to mounting hub |
| which attach the fan blade |
|
|
| are loose. |
| flanges to the mounting hub |
|
|
|
|
| are tight. |
|
| 2. Fan blade flanges not | 2. | Check to be sure that the | |
|
|
| seated properly. |
| fan blade flanges seat firmly |
|
|
|
|
| and uniformly on the motor |
|
|
|
|
| hub. If flanges are seated |
|
|
|
|
| incorrectly, loosen the flange |
|
|
|
|
| screws and retighten. |
|
| 3. Mounting plate and/or | 3. | Tighten the mounting plate | |
|
|
| ceiling outlet box is not |
| screws to the outlet box, |
|
|
| securely fastened. |
| and/or secure outlet box. |
|
| 4. Fan blades out of balance. | 4. | Interchanging an adjacent | |
|
|
|
|
| |
|
|
|
|
| redistribute the weight and |
|
|
|
|
| result in smoother operation. |
|
|
|
|
| Or use supplied balancing |
|
|
|
|
| kit to balance blades. |
|
|
|
|
|
|
Air Comfort Products
DIVISION OF EMERSON ELECTRIC CO.
8100 W. Florissant ¥ St. Louis, MO 63136
Part No. F40BP73150000 |
|
Printed in China 03/06 | Form No. BP7315 |