Models: PMD8137 PMD8142 PMD8143
Owner’s Manual
Maintenance
Clean the drill regularly. Before cleaning, remove the battery pack and any accessories (bits etc.).To clean, use ONLY a mild soap and damp cloth on the housing. Never immerse drill in any kind of fluid. Do not use any solvents or harsh abrasives on the drill housing as this may cause damage to the unit. Always keep the ventilation openings clear.
NOTE: All bearings in these tools are lubricated with a sufficient amount of
CAUTION: DO NOT keep the trigger switch pressed in with tape or any other permanent means or the circuit will not function properly. A malfunction may result possibly causing overheating or damage to the unit.
Do not open the drill, battery or battery charger.There are no user serviceable parts. Opening the unit will void the warranty.
TROUBLESHOOTING TIPS:
DRILL DOES NOT WORK?
• Recharge the battery
CHARGING INDICATOR LED NOT ILLUMINATED DURING RECHARGING?
•Check that battery pack is properly connected to the battery charger
•Check that the AC Adaptor is properly connected at both ends
SPECIFICATIONS |
|
Voltage | 18V |
Speed 1 | |
Speed 2 | |
Torque Settings | 24 + Drill |
Chuck Capacity | up to 3/8” |
Charger Input | 120V AC 60Hz |
ChargingTime | Approx. 1 Hour |
BatteryType |
QUESTIONS?
If you have any questions about this product, please contact our Customer Service Department at (888)
7 | 8 |