Safety Instructions
Areas of responsibility
Responsibilities of the manufacturer of the original equipment:
Leica Geosystems AG
The company above is responsible for supplying the product, including the User Manual in a completely safe condition.
The company above is not responsible for third party accessories.
Responsibilities of the person in charge of the instrument:
•To understand the safety instructions on the product and the instructions in the User Manual.
•To be familiar with local safety regulations relating to accident prevention.
•Always prevent access to the product by unauthorised personnel.
Electromagnetic Compatibility (EMC)
WARNING
The device conforms to the most stringent requirements of the relevant standards and regulations.
However, the possibility of causing interfer- ence in other devices cannot be totally excluded.
FCC statement (applicable in U.S.)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interfer- ence will not occur in a particular installation. If this equipment does cause harmful interfer- ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
EN
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
•This device may not cause harmful interfer- ence, and
•this device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada
•This device may not cause interference and
•this device must accept any interference, including interference that may cause undesired operation of the device.
Leica DISTOTM E7100i 812795a | 10 |
|
|