)If the tripod and the instrument are moved, always restart the func- tion and measure the height reference point again before continuing to measure!
Storage of constants / historical storage
Storage of a constant
You can store and recall a frequently used value e.g. height of a room.
Measure the desired distance, press and hold the 
button until the device beeps to confirm storage.
Recalling the constant
Press this button once to recall the constant and then press the 
button to enter it into your calculation.
Historical storage
Press this button twice and the previous 30 results (measurements or calculated results) are shown in reverse order.
The 
and 
buttons can be used for navigation.
Press this button to use a result from the summary line for further calculations.
Pressing the 
and 
buttons at the same time erases all the values in historical storage.
Timer (self-triggering) 
Press this button to set a
Press and hold down this button until the desired time delay is reached (max. 60 seconds).
Once the key is released with the laser activated, the remaining seconds |
|
until measurement (e.g. 59, 58, 57...) are displayed in a countdown. The last | GB |
5 seconds are counted down with a beep. After the last beep the measu- | |
rement is taken and the value is displayed. |
|
)The timer can be used for all measurements.
Working with BLUETOOTH®
Switching on BLUETOOTH® / sending measu- rements
A quick press on the 
- key starts DISTO™ BLUETOOTH®. The data connection must then be established out from a Pocket PC / PC by the
application software. A grey 
- icon will appear in the display until this has been successfully completed. BLUETOOTH® automatically switches off if the connection to the Pocket PC / PC is not established within 240 sec from when the BLUETOOTH® was switched on.
)Whilst the first connection between the Pocket PC/PC and the DISTO™ is being established, a prompt for the
Switching off BLUETOOTH®
BLUETOOTH® switches off as soon as the DISTO™ is switched off.
The direction keys
Eight direction keys (identified by a small arrow near the key) on the operator's keypad are used to manoeuvre the cursor. The direction keys become active when you switch to the second level (by pressing the 
Leica DISTO™ D8 LCA782205a gb
15