Leica 764558, 764555 manual Menu functions, Display in digital pointfinder mode, Settings

Page 9

Display in "digital pointfinder" mode

GB

Digital pointfinder (3x zoom)

The device has an integral digital pointfinder, which shows the target directly on the display. The displayed crosshairs allow precise measu- rements to be made even though the laser beam is not visible. See drawing {F.2}

The integral coloured digital pointfinder is a great help outdoors and can be used in every function. Longer distances and precise measurements on detailed surfaces can even be accomplished in bright sunlight without any problem.

The 3x zoom allows the image to be magnified to suit the user's requi- rements.

Press the key to activate the function. Press the key again to operate in a 1x, 2x or up to 3x zoom view.

The brightness of the camera can be adjusted through 5 levels using the

key or the key.

)Parallax errors occur when the digital pointfinder is used on close targets, the laser dot may appear displaced in the crosshair. In this case you should rely on the actual laser dot for targeting the object.

See drawing {F.2}

1Zoom step (1x, 2x, 3x)

2Timer

3Level (in °)

4Crosshairs

5Inclination angle

6Distance tracking value

7Image

Menu functions

Settings

Various device settings can be made in the menu. A vertical list shows each entry. In this menu the selection field (cursor) remains stationary and the list moves in a vertical direction. Starting from the centre of the list, the priority of list entries starts at the top and fans out clockwise. See drawing {G}.

The menu contains the following items:

1Units of measurement (distance)

2Units of measurement (angle)

3Display illumination

4Long range mode

5Tripod

6Beep

7Offset

8Digital pointfinder image in black/white

9Level in status field (in °)

10Reset

11Calibrate tilt sensor

Navigation in the menu

The menu allows settings to be customised for a particular user or applica- tion.

General description

Press and hold the key to enter the Setup menu.

By pressing the or keys, navigate through the main menu items in the menu.

Menu functions

6

Leica DISTO™ D8 LCA782205a gb

Image 9
Contents Leica Disto D8 Page Leica Disto D8 Contents Safety InstructionsLimits of use PrecautionsAreas of responsibility Hazards in useElectromagnetic Compatibility EMC Use of the product with BluetoothLaser classification Integrated distancemeterLabelling Start-upInserting/replacing batteries Changing the reference point multifunctional endpieceDisplay in normal mode KeypadSee figure E Settings Display in digital pointfinder modeMenu functions Menu functionsSetting the unit for tilt measurements Setting the unit for distance measurementsLong range Mode Display illuminationOffset Reset returning the instrument to the factory settingsDigital pointfinder image black / white Level in status fieldMeasuring OperationAddition / subtraction FunctionsArea FunctionsVolume Trapezium measurement Result is shown in the summary row Height Press and holdSurface area of the walls Circumfe Rence Stake out function Indirect measurementRuction of wooden frames Indirect measurement with tilt sensor Double tilt measurement with one measured distance Profile measurementDouble tilt measurement with two measured distances Measurement, for example the inclination angleWorking with Bluetooth Transmitting the measurement AppendixMessage codes Selecting particular values in the displayTechnical data Measuring conditionsMeasuring range Warranty CareTarget surfaces Leica Disto D8 Exit Switzerland Translation of original text LCA782205a