Bosch Power Tools GPL3T manual Features, Technical Data, Preparation, Battery Replacement

Features

V-Groove aligns unit with pipes

Strap raceway

Precision aluminum

180 degree laser reference point

On/Off switch

Battery access

Laser reference edge

Wall mount hole

Precision vials

3 Beams: plumb, level, square

	Technical Data
Accuracy:	Up to +/- 1/4" @ 75'
Manual Leveling:	3 bubble vials
Range:	Laser visibility – up to 100'

Tripod Mount: 1/4" x 20 (can be used without tripod; tripod not included)

Laser Diode:	Class II, 635nm
Environmental:	Dust, dirt and water resistant
Warranty:	2 year limited
Power Supply:	3 “AAA” batteries
Operating Temperature Range:	-10°C to +50° C

Preparation

Battery Replacement:

Turn on/off switch on the back of GPL3T in the counter-clockwise direction and completely unscrew the switch. This will provide you access to the battery compartment. Replace all three batteries and then return the switch to the original position.

Battery Access

Note: Alkaline batteries offer the longest battery life when used in this device.

Attaching GPL3T:

1/4" x 20 Tripod Mount: Use the threaded hole in the base to mount the laser tool to a camera, contractor's or surveyor's tripod.

Strap Raceways: Use straps (not included) to fasten laser tool to pipes, studs, etc.

Magnetic Base: Use the magnetic base to lock the laser tool on to metal studs and pipes.

V-Groove: Use the v-groove to align the laser tool on pipes up to 10" in diameter.

-4-