This Palm Grip Laser Level has been designed to be a
1, ALWAYS handle the tool with care, Treat it as an optical device, such as a camera or binoculars,,
2o AVOID exposing the tool to shock, continuous vibration or extreme hot or cold temperature.
3, ALWAYS store the tool indoors., When not in use, ALWAYS store the tool in its protective case.
4.ALWAYS keep the tool free of dust and liquids,, If needed, use ONLY a soft cloth or cotton swab and glass cleaner to clean the laser emitting window,
5.ALWAYS clean and thoroughly dry the tool after each use,
6.Check the batteries regularly to avoid deterioration° ALWAYS remove the batteries from the tool if it is not going to be used for an extended period of time.
7o DO NOT disassemble the Palm Grip Laser Level., This wili not only void the warranty, but coutd expose the user to hazardous radiation exposure,,
8. DO NOT attempt to change any part of the laser lens,,
9, ALWAYS remove the Magstic adhesive material from the wall surface immediately after use and place the protective tabs back on the adhesive for storage° If the Magstic material gets soiled, it can be cleaned with a damp cloth,,
10, Magstic is intended to be used on smooth surfaces only. Magstic is NOT intended to be used on rough textured or rough
11.Do not remove Magstic from the base of the tool unless new Magstic is required. Removing Magstic from the base of the tool will damage the adhesive strips and they will no longer be usable.
48291 ManuaLRevtsed_06_)907 | Page 14 |