Specifications | Lexicon 960L specs

Lexicon

Specifications

Specifications

960L Mainframe

Analog Input
Connectors	Eight, Female XLR
Impedance	50Kohm, balanced
Level (for 0 dbFS)	+24dBu
Freq Response @48K	20Hz-20KHz, ±1db
Freq Response @96K	20Hz-40KHz, ±1db
A/D Conversion	24 bits
	128x oversampled
A/D Dyn Range	>110 dB (20-20kHz)
THD	<.002%
CMRR	>50db
Crosstalk @ 1Khz	< -100dB
Analog Output
Connectors	Eight, Male XLR
Impedance	50 Ohm, balanced
Level (at 0 dBFS)	+24dBu
Freq Response @48K	20Hz-20Khz, ±1dB
Freq Response @96K	20Hz-40Khz, ±1dB
D/A Conversion	24 bits
8x oversampled @ 44.1/48Khz
4x oversampled @ 88.2/96Khz
D/A Dyn Range	>110 dB (20-20kHz)
THD	<.002%
Crosstalk @ 1kHz	< -100dB
A/A Performance
Freq Response @48K	20Hz-20Khz, ±1dB
Freq Response @96K	20Hz-40Khz, ±1dB
Dyn Range	>107 dB (20-20kHz)
THD	<.002%
Digital Audio IO
Connectors	Four Male XLR Outputs
	Four Female XLR Inputs
Format	AES/EBU
Word Size	24 bits
Sample Rates
Internal	44.1/48/88.2/96kHz
Accuracy	within ±10ppm
External	44.1/48/88.2/96kHz
Lock Range	±1%

Group Delays (milliseconds)

		44.1 kHz		48 kHz	88.2 kHz		96 kHz

	A/D		1.44	1.33	0.81		.0.74

	A/A		2.42	2.23	1.80		1.66

	D/A		1.59	1.42	1.35		1.25

	D/D		0.54	0.50	0.36		0.33

Synchronization
TTL Word Clock Input *
					75 Ohm, BNC
				self-terminating loopthru
TTL Word Clock Output*						Low Z, BNC
				(*Falling edge marks start of frame)
Clock Jitter
Intrinsic				Exceeds AES3 Amendment 1
Jitter Gain				Exceeds AES3 Amendment 1
Control Interfaces
LARC2 Ports						2
MIDI **							In/Out/Thru
				(**supports program change)
Algorithms
Ambience				(48K Stereo & Surround)
Chamber				(48K Stereo & Surround)
Plate				(48K Stereo & Surround)
Reverse				(48K Stereo & Surround)
Random Hall				(48/96K Stereo & Surround)
Ambient Chamber					(48K Surround)

Standard Hardware Configuration

DSP/CPU Card Compartment

One System CPU Card

One Reverb DSP Card

Two Spare DSP card slots

One MIDI Card

IO Card Compartment

One Analog Input Card

One Analog Output Card

One AES/EBU Digital IO Card

One IO/Clock Card

One Spare IO Card slot

Storage Media

Hard Disk

3.5" Floppy Disk Drive

CD-ROM Drive

Image 68

Lexicon 960L owner manual Specifications

Contents

960L. Digital Effects System Important Safety Instructions Table Of Contents Table Of Contents Introduction Title of Section Mainframe Description Rear PanelAbout the 960L Unpacking the 960L Clock Card Midi Connectors Five-pin DIN female Remote-Control ConnectorsMains Power Switch IEC Power Connector Standby Switch and Indicator Front PanelFloppy Drive Thumbscrews CPU Card Behind the Front PanelDSP-Card Slots Installation MountingVentilation Location Wordclock Connections Digital Audio ConnectionsMidi Connections LARC2 Remote Navigating Typical Display Screens Unpacking the Larc LARC2 RemoteAbout the LARC2 LARC2 Control Surface LARC2 Control Surface Getting What You Want LARC2 Connections Navigating Typical Display Screens A typical display screen Mode Faders Joystick About the Faders and Joystick Lexicon Button Audio IndicatorsFine Adjust Basic Operation AN Overview of the Controls Basic Operation An Overview of the Controls Setup Control Mode Quick Guide to Operation 960L Owner’s MaunalBasic Operations Quick Guide to Operation Machine Selection Program Loading Editing a Program or Register Storing Your Edits Name screen Info screens are similar Control Mode CLOCKS, Configuration Operations in Detail Loading Programs and Registers Loading Programs Programming Machines Loading RegistersAlternative Loading Techniques Control Mode Clocks, Configuration, and System Screens Wordclock Input, Output, and Machine Configuration Locked and unlocked wordclock 960L Owner’s Maunal Operations in Detail 44.1/48kHz Dual machines 5-in and 2-in Output Assignment Left Right Center Unused Surround Surround Analog and Digital I/O System Screen Fine Adjust EditingEditing Algorithms Editing With the Faders Editing with the Joystick Quick Comparisons via the Lexicon Button Editing Inputs and Outputs Input Panning Output Panning Avoiding Overload Setting Levels960L Surround Panning Rules From the Edit Algorithm, Inputs, Outputs Options screen Using the Edit Algorithm ScreenV-Page and Parameter Reassignment 22 Edit V-Page screen programming the joystick Naming and Annotating Storing and Labeling Your EditsStoring 25 a Register Info Options Enabled Organizing Your Registers Machine Mode Using the Floppy DriveCD-ROM Edit Tools for Registers Using the Reverb Programs Using the Reverb Programs Reverberation and Reality Using The Reverb Program Lexicon, Inc Reverberation and Reality Msec Sound in Space a Short History of Stereo and Surround Algorithms Random Hall Surround Hall ChamberPlate & Surround Plate Ambience & Surround Ambience Inverse Ambient ChamberReverse & Surround Reverse Parameters Used in the 960L Algorithms Using The Reverb ProgramLexicon, Inc FbckL FbckRFbckLF FbckLS LvLL LvRRLvLR LvRL LvLFLF RearRoll RearRvbRShape RSpread Size SlopeSpin Spread Midi Channel Usage Description NomenclatureMidi Channel Allocation Card Configuration Bank and Program MappingBank Description Program # Description 960Ls response Midi SysexIncoming Inquiry Midi Byte Description Midi Implementation Chart Specifications Specifications Connector 48K Rack Units96K Factory Programs LARC2 User Interface Appendix Appendix Program Descriptions Halls Appendix B1 P4 B3 P4 B6 P2 B7 P2 B9 P9 B11 P5 Empty Mini Chamber Similar to Snare Chamber, but even smaller Lg Brite Room Random Hall Simply large and bright Echo Plate Like Flat Plate, but with echoes Stereo Bank Kitchen Chamber Can you find your disposal sound effect?