Clock Card Midi Connectors Five-pin DIN female | Lexicon 960L

The Mainframe

Lexicon, Inc.

The Rear Panel, continued

I/O Clock Card

MIDI Connectors (Five-pin DIN female)

•MIDI In

Accepts MIDI data from other MIDI-equipped devices.

•MIDI Thru

Retransmits, unchanged, MIDI data received at the MIDI In connector.

•Midi Out

Transmits MIDI data generated or modified by the 960L.

TTL WordClock (BNC)

•Input Loop

Allows the 960L to be synchronized to other studio equipment.

•Output.

Allows studio equipment to be synchronized to the 960L.

Note: The 960L can also derive wordclock from AES input 1-2, or generate it internally.

Remote-Control Connectors

The LARC2 must be connected to the Remote 1 9-pin D-connector. The 960L Remote connectors are for use only with the LARC2 controller.

Important:

Never connect either Mainframe remote port to anything other than LARC2. Doing so may damage your equipment.

Option Plates

Reserved for future use.

Analog Input Card

The 960L’s analog audio input card has eight female XLR connectors, all electronically balanced. For impedances and signal levels, see the Specifications Section near the end of this manual.

Analog Output Card

The 960L’s analog audio output card has eight male XLR connectors, all electronically balanced. For impedances and signal levels, see the Specifications Section near the end of this manual.

AES I/O Card

The 960L’s digital audio inputs and outputs are combined on one card holding four XLR two-channel female connectors for AES input and four XLR two- channel male connectors for AES output.

Mains Power Switch

This switch turns the power in the 960L completely off or on.

Mains Voltage Selector

Before connecting the 960L Mainframe to power mains, make sure the setting matches your local mains voltage. Refer to the Installation section of this chapter for more information.

IEC Power Connector

Accepts IEC power cords with mains plugs specific to your country.

1-2

Image 8

Lexicon 960L Clock Card Midi Connectors Five-pin DIN female, TTL WordClock BNC, Remote-Control Connectors, Option Plates

Contents

960L. Digital Effects System Important Safety Instructions Table Of Contents Table Of Contents Introduction Title of Section Mainframe Description Rear PanelAbout the 960L Unpacking the 960L Clock Card Midi Connectors Five-pin DIN female Remote-Control ConnectorsMains Power Switch IEC Power Connector Standby Switch and Indicator Front PanelFloppy Drive Thumbscrews CPU Card Behind the Front PanelDSP-Card Slots Installation MountingVentilation Location Wordclock Connections Digital Audio ConnectionsMidi Connections LARC2 Remote Navigating Typical Display Screens Unpacking the Larc LARC2 RemoteAbout the LARC2 LARC2 Control Surface LARC2 Control Surface Getting What You Want LARC2 Connections Navigating Typical Display Screens A typical display screen Mode Faders Joystick About the Faders and Joystick Lexicon Button Audio IndicatorsFine Adjust Basic Operation AN Overview of the Controls Basic Operation An Overview of the Controls Setup Control Mode Quick Guide to Operation 960L Owner’s MaunalBasic Operations Quick Guide to Operation Machine Selection Program Loading Editing a Program or Register Storing Your Edits Name screen Info screens are similar Control Mode CLOCKS, Configuration Operations in Detail Loading Programs and Registers Loading Programs Programming Machines Loading RegistersAlternative Loading Techniques Control Mode Clocks, Configuration, and System Screens Wordclock Input, Output, and Machine Configuration Locked and unlocked wordclock 960L Owner’s Maunal Operations in Detail 44.1/48kHz Dual machines 5-in and 2-in Output Assignment Left Right Center Unused Surround Surround Analog and Digital I/O System Screen Fine Adjust EditingEditing Algorithms Editing With the Faders Editing with the Joystick Quick Comparisons via the Lexicon Button Editing Inputs and Outputs Input Panning Output Panning Avoiding Overload Setting Levels960L Surround Panning Rules From the Edit Algorithm, Inputs, Outputs Options screen Using the Edit Algorithm ScreenV-Page and Parameter Reassignment 22 Edit V-Page screen programming the joystick Naming and Annotating Storing and Labeling Your EditsStoring 25 a Register Info Options Enabled Organizing Your Registers Machine Mode Using the Floppy DriveCD-ROM Edit Tools for Registers Using the Reverb Programs Using the Reverb Programs Reverberation and Reality Using The Reverb Program Lexicon, Inc Reverberation and Reality Msec Sound in Space a Short History of Stereo and Surround Algorithms Random Hall Surround Hall ChamberPlate & Surround Plate Ambience & Surround Ambience Inverse Ambient ChamberReverse & Surround Reverse Parameters Used in the 960L Algorithms Using The Reverb ProgramLexicon, Inc FbckL FbckRFbckLF FbckLS LvLL LvRRLvLR LvRL LvLFLF RearRoll RearRvbRShape RSpread Size SlopeSpin Spread Midi Channel Usage Description NomenclatureMidi Channel Allocation Card Configuration Bank and Program MappingBank Description Program # Description 960Ls response Midi SysexIncoming Inquiry Midi Byte Description Midi Implementation Chart Specifications Specifications Connector 48K Rack Units96K Factory Programs LARC2 User Interface Appendix Appendix Program Descriptions Halls Appendix B1 P4 B3 P4 B6 P2 B7 P2 B9 P9 B11 P5 Empty Mini Chamber Similar to Snare Chamber, but even smaller Lg Brite Room Random Hall Simply large and bright Echo Plate Like Flat Plate, but with echoes Stereo Bank Kitchen Chamber Can you find your disposal sound effect?