Operations in Detail | Lexicon, Inc. |
Storing and Labeling Your Edits
When you’ve edited a Program or Register until it just meets your needs, you can store it as a Register and label it for future use.
Storing
•Press the STORE key on the LARC2 Control Surface.
•If you've edited a Program, the 960L will select the next empty Bank (or the Register Bank you last stored to) and Register.
•If you’ve edited a Register, the 960L will offer to overwrite the original version. To accept, press the STORE key again.
•To change the storage location, press the BANK key and enter the number of the desired Register Bank, or scroll to it with the Navigation Arrows. Then press REGISTER and select the desired Register in that Bank. Pressing STORE again will store your edits to that location. The Register you select can be an empty one, or you can choose to overwrite an existing Register.
Naming and Annotating
Registers and Register Banks can be given any desired name of up to 16 characters and can be annotated with up to 150 characters per Register and 100 characters per Bank.
•Press REGISTER to bring up the Register Load screen (Figure
•Press BANK to name or add info to a Register Bank. Otherwise you will be working with the selected Register.
•Press the INFO soft button to brings up the annotation screen (Figure
•The currently selected character will be outlined in red on the name line and in the character matrix below.
•Characters on the name line are selected with the increment and decrement keys (hence the
•Characters within the matrix below that line are selected with the navigation arrows.
•For faster text entry, a PS/2 keyboard can be plugged into the AUX jack on the back of the LARC2. The keyboard should be connected before power is applied to the 960L Mainframe.
•Just below the character matrix is a line that shows whether the system is in Insert or Overwrite mode.
•When editing the Information display, the screen will show the relevant name, Bank number, and Register number (if applicable) at the upper left.
When finished editing, either press the SAVE soft button or the ENTER key if you’ve annotated a Bank, or store the Register if you’ve annotated a Register.
