Nomenclature, Midi Channel Allocation | Lexicon 960L specs

960L Owner’s Maunal

MIDI

MIDI

The MIDI implementation for the Rev 1 960L is very basic. Since the implementation is fixed, there is no user interface for modifying it.

MIDI controller's lowest channel number is 1 (rather than 0), you should add one to the values found in channel table below.

Nomenclature

Numbering in MIDI, i.e. channel number, program numbers, etc., can be confusing, since some sources start counting from zero and others start from one. This description will start from zero. If, for example, your

MIDI Channel Allocation

The 960L uses a fixed channel allocation. All channels are used or reserved, which means that 960L should be the only device on its MIDI cable.

Channel	Usage	Description

0	Global Channel	Not currently in use

1	DSP Card	Configuration of card.

2	Unused	Reserved for Future Use

3	Unused	Reserved for Future Use

4	Machine 1	Program change for machine 1

5	Machine 2	Program change for machine 2, if present in current configuration

6	Machine 3	Program change for machine 3, if present in current configuration

7	Machine 4	Program change for machine 4, if present in current configuration

8	Unused	Reserved for Future Use

9	Unused	Reserved for Future Use

10	Unused	Reserved for Future Use

11	Unused	Reserved for Future Use

12	Unused	Reserved for Future Use

13	Unused	Reserved for Future Use

14	Unused	Reserved for Future Use

15	Unused	Reserved for Future Use

6-1

Image 63

Lexicon 960L owner manual Nomenclature, Midi Channel Allocation, Channel Usage Description

Contents

960L. Digital Effects System Important Safety Instructions Table Of Contents Table Of Contents Title of Section Introduction Mainframe Unpacking the 960L DescriptionRear Panel About the 960L IEC Power Connector Clock Card Midi Connectors Five-pin DIN femaleRemote-Control Connectors Mains Power Switch Thumbscrews Standby Switch and IndicatorFront Panel Floppy Drive Behind the Front Panel DSP-Card SlotsCPU Card Location InstallationMounting Ventilation Digital Audio Connections Midi ConnectionsWordclock Connections Navigating Typical Display Screens LARC2 Remote LARC2 Remote About the LARC2Unpacking the Larc LARC2 Control Surface LARC2 Control Surface LARC2 Connections Getting What You Want A typical display screen Navigating Typical Display Screens About the Faders and Joystick Mode Faders Joystick Audio Indicators Fine AdjustLexicon Button AN Overview of the Controls Basic Operation An Overview of the Controls Basic Operation Quick Guide to Operation Setup Control Mode 960L Owner’s MaunalBasic Operations Quick Guide to Operation Program Loading Machine Selection Storing Your Edits Editing a Program or Register Name screen Info screens are similar Operations in Detail Control Mode CLOCKS, Configuration Loading Programs Loading Programs and Registers Loading Registers Alternative Loading TechniquesProgramming Machines Wordclock Control Mode Clocks, Configuration, and System Screens Locked and unlocked wordclock Input, Output, and Machine Configuration 960L Owner’s Maunal Operations in Detail 44.1/48kHz Dual machines 5-in and 2-in Output Assignment Left Right Center Unused Surround Surround System Screen Analog and Digital I/O Editing With the Faders Fine AdjustEditing Editing Algorithms Quick Comparisons via the Lexicon Button Editing with the Joystick Input Panning Editing Inputs and Outputs Output Panning Setting Levels 960L Surround Panning RulesAvoiding Overload Using the Edit Algorithm Screen V-Page and Parameter ReassignmentFrom the Edit Algorithm, Inputs, Outputs Options screen 22 Edit V-Page screen programming the joystick Storing and Labeling Your Edits StoringNaming and Annotating Organizing Your Registers 25 a Register Info Options Enabled Edit Tools for Registers Machine ModeUsing the Floppy Drive CD-ROM Using the Reverb Programs Reverberation and Reality Using the Reverb Programs Using The Reverb Program Lexicon, Inc Reverberation and Reality Msec Sound in Space a Short History of Stereo and Surround Random Hall Algorithms Ambience & Surround Ambience Surround HallChamber Plate & Surround Plate Ambient Chamber Reverse & Surround ReverseInverse Parameters Used in the 960L Algorithms Using The Reverb ProgramLexicon, Inc FbckLS FbckLFbckR FbckLF LvRL LvLFLF LvLLLvRR LvLR RSpread RearRollRearRvb RShape Spread SizeSlope Spin Midi Nomenclature Midi Channel AllocationChannel Usage Description Program # Description Card ConfigurationBank and Program Mapping Bank Description Midi Sysex Incoming Inquiry Midi Byte Description960Ls response Midi Implementation Chart Specifications Specifications Factory Programs Connector48K Rack Units 96K LARC2 User Interface Appendix Halls Appendix Program Descriptions Appendix B1 P4 B3 P4 B6 P2 B7 P2 B9 P9 B11 P5 Empty Mini Chamber Similar to Snare Chamber, but even smaller Lg Brite Room Random Hall Simply large and bright Echo Plate Like Flat Plate, but with echoes Stereo Bank Kitchen Chamber Can you find your disposal sound effect?