Lexicon 960L owner manual Navigating Typical Display Screens, A typical display screen

960L Owner’s Manual The LARC2 Remote

Navigating Typical Display Screens

The use and navigation of the display will be illustrated with the screen shown in Figure 2-4, from Algorithm Edit Mode. Bring up this screen by pressing the EDIT and then ALGORITHM buttons. Note that the parameters currently assigned to the faders, and their current settings, are shown on the Scribble Strip, just above the Soft Button Labels.

The Action Display, which occupies the left half of the display’s top line, will show the current operating mode when you first enter that mode. When you touch a fader, it will show the name of the attached parameter and its current setting, and will continue to show that information until you touch another fader. The action indications are “sticky,” in that they remain on the display until another action indication is displayed. In Figure 2-4, the Action Display shows "Edit Mode" because pressing the EDIT button was the most recent action.

The Effect Display, which occupies the right half of the top line, identifies the Program or Register loaded in the active machine. Here, it shows that the 960L is using "Large Hall +", which is Register 1 in Bank 1.

The Main Operating Display, which changes from mode to mode, always occupies the same area shown, i.e. the center and left of the screen. In this screen, used for editing algorithms, it shows four algorithm pages, each consisting of parameters and their settings. The currently selected page has its page number highlighted, with a red outline.

Parameters in the rows not highlighted are not assigned to the faders and are set to the values shown.

Touching any fader will select the parameter controlled by that fader. At that point, the selected parameter and its setting will be highlighted on the Scribble Strip and also on any page of settings visible in this display. It will also be displayed in larger type on the Action Display.

You can also scroll to any desired parameter, whether on the current page or not, with the Navigation Arrows. If you scroll up or down to a different page, that page and all its parameters will be "connected" to the faders. Note that you can also select a page by pressing its number on the Numeric Keypad. Once a new page is selected, the faders automatically position to the appropriate value (auto-nulled).

You can move as many faders at a time as you like. All the connected parameters will be affected. If you touch several faders, the last fader you release will then be displayed as the "selected" parameter. In this mode (Algorithm Edit) you can use the +/- Buttons to make fine adjustments on the selected parameter.

The Paging Arrow along the right side of the Main Operating Display shows that more items are available than will fit the current listing. The total number of pages, 8 in Figure 2-4, is listed in the lower right corner of the Main Operating Display. This arrow is greyed out at the top, indicating that no further items are available in that direction. The rows wrap. After you key down to the last row, the next press of the Down Arrow will bring up the first row, and vice versa if you use the Up Arrow.

			System Status
	Main Operatng	Effect Display	Display
Action Display
	Display

Scribble Strip	Soft Button	Joystick Status
		Display
	Labels
		Figure 2-4 — A typical display screen
2-4