Epson 36-075 Fastening Machine to Supporting Surface, Moving Cuttinghead to the UP Position

Page 5

A

B

Fig. 6

C

Fig. 7

MOVING CUTTINGHEAD TO THE UP POSITION

1.Push down on switch handle (A) Fig. 6, and pull out cuttinghead lock knob (B).

2.The cuttinghead (C) can then be moved to the up position, as shown in Fig. 7.

ASSEMBLING

DUST BAG

1.Assemble dust bag (A) Fig. 8, to the dust spout (B) making sure the wire ring (C) is engaged with the groove in the spout.

B

C

A

Fig. 8

FASTENING MACHINE TO SUPPORTING SURFACE

Before operating your compound miter saw, make sure it is firmly mounted to a sturdy workbench or other supporting surface. Four holes are provided, two of which are shown at (A) Fig. 9, for fastening the saw to a supporting surface.

When frequently moving the saw from place to place we suggest that the saw be mounted to a 3/4″ piece of plywood. The saw can then be easily moved from place to place and the plywood clamped to the supporting surface using “C” clamps.

5

A

A

Fig. 9

Image 5
Contents Compound Power Miter Saw Always Wear EYE Protection Safety RulesAdditional Safety Rules for Miter Saws Unpacking Assembly InstructionsAssembling Table Lock Handle Rotating Table to 90 Degree PositionAssembling Dust BAG Fastening Machine to Supporting SurfaceMoving Cuttinghead to the UP Position Power Connections Connecting SAW to Power SourceMinimum Gauge Extension Cord Extension CordsLocking Switch OFF Position Operating Controls and AdjustmentsTable Hazard Area Starting Stopping MachinePointer and Scale Adjusting PointerRotating Table for Miter Cutting Rear SUPPORT/CARRYING Handle Tilting Cuttinghead for Bevel CuttingAdjusting Downward Travel of SAW Blade Adjusting Fence Degrees to BladeAdjusting Tension Cuttinghead Return Spring Adjusting 90 Degree Bevel StopsLocking Cuttinghead in the Down Position Typical Operations and Helpful HintsGeneral Cutting Operations Auxiliary Wood FenceCutting Bowed Material Cutting AluminumPiece of crown moulding used for the inside Cutting Crown MouldingChanging the Blade MaintenanceBrush Inspection Replacement Page PARTS, Service or Warranty Assistance PORTER-CABLE Delta Service Centers