Emerson CF2800PW, CF2800WB, CF2800BS instruction

14.Slightly separate the upper and lower fan blades and carefully seat the strut into the holes in the end of the fan blades (Figure 10). Secure the strut by installing two 6-32 x 6mm Phillips button head screws (supplied). Be careful not to scratch the blades.

6-32 x 6mm PHILLIPS BUTTON HEAD SCREWS (2)

STRUT

IMPORTANT: Perform steps 19 through 23 ONLY if you want to install your ceiling fan without the light fixture. If you want to install your fan with the light fixture, omit steps 19 through 23 and proceed to step 24.

19.Remove the nut and lockwasher securing the light fixture to the switch housing cover (Figure 12). Unscrew the light fixture from the switch housing cover. Retain the light fixture in case you want to install it later.

	SWITCH HOUSING
	COVER	REMOVE AND
		REMOVE AND
	REMOVE AND	RETAIN THIS
	REMOVE AND	LOCKWASHER
	RETAIN THIS NUT	LOCKWASHER
	RETAIN THIS NUT

Figure 10

FAN BLADE

15.Grasp the blades and turn them over, then install the remaining four 6-32 x 6mm Phillips button head screws (supplied) to secure the struts.

Remove the masking tape securing the two blade flanges together. Repeat steps 12 through 15 for the remaining four blade assemblies.

16.Use the 10 round recessed holes in the motor hub marked with “5” and install the five blade assemblies in accordance with step 17.

17.Attach one blade assembly to the motor hub using two 10-32 x 1” oval head screws (supplied) (Figure 11). Do not tighten completely at this time. Install four remaining blade assemblies in the same way. Gently snug all flange screws to the motor hub, working around the hub in a clockwise sequence. Next, securely tighten all flange screws, again working in a clockwise sequence. Failure to follow this procedure could result in fan wobble. This completes the blade installation.

Figure 12

LIGHT FIXTURE

20. Screw the 2-1/4” pipe nipple (supplied) several full

turns into the switch housing cover (Figure 13).

Reinstall and tighten the lockwasher and nut onto

the nipple (Figure 13).

21. Pass the speed control switch chain from the

switch housing through the chain bushing in the

switch housing cover (Figure 13). Attach the

speed control pendant to the pull chain using a

plastic coupler.

22. Make sure all wires and wire connectors are

inside the switch housing, then position the switch

housing cover on the switch housing so that the

two 8-32 x 3/8” pan head screws (previously

installed) protrude through the keyhole slots in the

switch housing cover. Turn the switch housing

cover clockwise to engage the slots, then

8-32 x 3/8"

PAN HEAD SCREWS (2)

SWITCH

HOUSING

Figure 11

10-32 x 1" OVAL HEAD SCREW (2 per blade assembly)

MOTOR HUB

securely tighten the two screws (Figure 13).

NOTE: Be sure the wires are not pinched between the switch housing and the switch housing cover.

SWITCH HOUSING COVER

2-1/4" PIPE NIPPLE

REINSTALL

LOCKWASHER AND

NUT

SPEED CONTROL

SWITCH CHAIN

18.Partially screw two 8-32 x 3/8” pan head screws (supplied) into the threaded holes in the switch housing (Figure 11).

Figure 13

SPEED CONTROL	TIGHTEN TWO
SPEED CONTROL	8-32 x 3/8"
PENDANT	PAN HEAD
	SCREWS

CF2800BS, CF2800WB, CF2800PW specifications

The Emerson CF2800BS, CF2800PW, and CF2800WB ceiling fans are renowned for their combination of style, performance, and advanced technology, making them excellent choices for both residential and commercial spaces. Each model features a sleek contemporary design that seamlessly integrates into a variety of decor styles. With an emphasis on providing exceptional airflow, these fans not only enhance comfort but also contribute to energy savings.

One of the standout features of the CF2800 series is the powerful motor. The high-performance 153mm x 15mm motor delivers efficient airflow, ensuring that even large rooms maintain a comfortable temperature. These fans operate quietly, making them perfect for bedrooms, living rooms, or offices where noise reduction is a priority.

The CF2800BS model boasts a beautiful brushed steel finish, adding an element of modern elegance to any space. It is equipped with five blades, designed for optimized air circulation, and includes an integrated light fixture that enhances illumination in the room.

The CF2800PW model offers a pristine white finish, making it an ideal choice for lighter spaces or traditional aesthetics. This model also features five blades and includes the same high-performing motor found in the other variants, ensuring consistency in performance across the series.

The CF2800WB stands out with its black walnut finish, perfect for creating a warm ambiance in indoor areas. The rich wood tone adds warmth and character while keeping functionality at the forefront. Like its counterparts, it features five meticulously designed blades to maximize airflow efficiency.

Technology integration is a significant highlight of the CF2800 series. Each fan is equipped with a reversible motor, allowing for both summer and winter modes. This feature helps in circulating cool air during hot months and redistributing warm air during colder months, enhancing HVAC efficiency.

Installation is made easy with included mounting hardware, ensuring that homeowners and professionals alike can quickly set up the fans without hassle. The combination of style, advanced airflow technology, energy efficiency, and versatile design makes the Emerson CF2800 series a preferred choice for those seeking both functionality and aesthetic appeal in their ceiling fans.