Using Your Ceiling Fan, Three-Speed | Emerson CF2800PW, CF2800WB

!WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

3.Screw the two 1-1/4” threaded studs (supplied) into the tapped holes in the hanger bracket (Figure 20).

4.Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 20).

5.Secure the ceiling cover in place by sliding lockwashers (supplied) over the threaded studs and installing the two knurled knobs (supplied). (Figure 21.) Tighten the knurled knobs securely until the ceiling cover fits snugly against the ceiling and the hole in the ceiling cover is clear of the downrod. Your fan is now wired to be turned on and off from the fan switch.

CEILING COVER

LOCKWASHERS (2)

KNURLED KNOBS (2)

1-1/4"

THREADED STUDS (2)

Figure 21

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

6.Screw three candelabra base lamps (60-watt each max.) in the light fixture sockets. Pass the light fixture switch chain through the light fixture glass (Figure 22). Position the glass on the light fixture so that the three elongated points of the glass are over the three lamps. Install the fiber washer and the finial nut (supplied) to hold the glass on the light fixture. Securely tighten the finial nut.

7.Slip the speed control switch pull chain through the hole in the oval pendant (supplied), then secure the pendant by snapping the plastic coupling (supplied) onto the end of the chain (Figure 22). Repeat this procedure to connect the pendant to the light switch pull chain.

60-WATT

CANDELABRA

SOCKET (3) BASE LAMP (3)

LIGHT FIXURE

	GLASS	FIBER WASHER
	SPEED	FIBER WASHER
	CONTROL	FINIAL NUT
	PENDANT	FINIAL NUT
	PENDANT
	PLASTIC	LIGHT FIXTURE
	COUPLING	LIGHT FIXTURE
	COUPLING	PENDANT
		PENDANT
		PLASTIC
		COUPLING
	Figure 22

Using Your Ceiling Fan

1.Restore electrical power to the outlet box by turning the electricity on at the main fuse box.

2.Check the operation of the fan by gently pulling on the 4-position speed control switch pull chain. The operating sequence is as follows:

THREE-SPEED
1st Pull—HIGH	3rd Pull—Low
2nd Pull—Medium	4th Pull—OFF

3.If airflow is desired in opposite direction, turn your fan off and wait for the blades to stop turning, then press the rocker switch located on top of the motor housing, and turn the fan on again (Figure 23). The fan blades will turn in the opposite direction and reverse airflow.

4.Check the operation of the light fixture by gently pulling the light switch pull chain.

REVERSING SWITCH

TOP OF

HOUSING

	SPEED CONTROL
	SWITCH PULL	LIGHT SWITCH
	CHAIN	LIGHT SWITCH
	CHAIN	PULL CHAIN
		PULL CHAIN
	Figure 23

CF2800BS, CF2800WB, CF2800PW specifications

The Emerson CF2800BS, CF2800PW, and CF2800WB ceiling fans are renowned for their combination of style, performance, and advanced technology, making them excellent choices for both residential and commercial spaces. Each model features a sleek contemporary design that seamlessly integrates into a variety of decor styles. With an emphasis on providing exceptional airflow, these fans not only enhance comfort but also contribute to energy savings.

One of the standout features of the CF2800 series is the powerful motor. The high-performance 153mm x 15mm motor delivers efficient airflow, ensuring that even large rooms maintain a comfortable temperature. These fans operate quietly, making them perfect for bedrooms, living rooms, or offices where noise reduction is a priority.

The CF2800BS model boasts a beautiful brushed steel finish, adding an element of modern elegance to any space. It is equipped with five blades, designed for optimized air circulation, and includes an integrated light fixture that enhances illumination in the room.

The CF2800PW model offers a pristine white finish, making it an ideal choice for lighter spaces or traditional aesthetics. This model also features five blades and includes the same high-performing motor found in the other variants, ensuring consistency in performance across the series.

The CF2800WB stands out with its black walnut finish, perfect for creating a warm ambiance in indoor areas. The rich wood tone adds warmth and character while keeping functionality at the forefront. Like its counterparts, it features five meticulously designed blades to maximize airflow efficiency.

Technology integration is a significant highlight of the CF2800 series. Each fan is equipped with a reversible motor, allowing for both summer and winter modes. This feature helps in circulating cool air during hot months and redistributing warm air during colder months, enhancing HVAC efficiency.

Installation is made easy with included mounting hardware, ensuring that homeowners and professionals alike can quickly set up the fans without hassle. The combination of style, advanced airflow technology, energy efficiency, and versatile design makes the Emerson CF2800 series a preferred choice for those seeking both functionality and aesthetic appeal in their ceiling fans.

Using Your Ceiling Fan

THREE-SPEED

CF2800BS, CF2800WB, CF2800PW specifications