Starting playback
1Use either <INPUT SELECTOR> or [INPUT d,f] to select an input source you want for playback.
The input indicator for the selected source lights.
GSelectable sourcesH| PHONO |
| TUNER |
| CD |
| AUX/DVD |
| ||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
•You can also select an input source by pressing the Input selector buttons of the remote control.
•The input source you select is stored in memory even after you turn off power, and the same source is selected when power is turned on again.
2Press <SPEAKERS A/B> to select the speaker system to be used for playback.
The indicator for the selected speaker system lights.
3Start playing back the source.
4Adjust the VOLUME to the desired level.
nAdjusting the tone
•<BASS> Adjusts the bass sound.
•<TREBLE> Adjusts the treble sound.
•<BALANCE> Adjusts the left and right output balance.
Direct playback using a source audio component
Since the audio signals bypass the tone control circuits (BASS/ TREBLE/BALANCE), the music reproduction is more faithful to the original sound.
Press SOURCE DIRECT.
The SOURCE DIRECT indicator lights.
To adjust the tone, turn off SOURCE DIRECT.
Playback using the LOUDNESS function
This feature performs playback after compensating for insufficient bass and treble response at low volume levels to reproduce a more balanced sound.
Press <LOUDNESS>.
The LOUDNESS indicator lights.
Muting sound
This function mutes the sound by stopping audio output.
Press [MUTE].The MUTE indicator lights.
•To cancel the mute operation, press the button again.
You can also cancel the mute operation by operating VOLUME of the remote control.
ENGLISH
Using headphone set
Plug headphones into PHONES jack.
• To listen with headphones, turn speaker output OFF.
nAdjusting the volume
Adjust the VOLUME to the desired level.
NOTE
To prevent hearing loss, do not raise the volume level excessively when using headphones.
Starting Recording
1 Use either <INPUT SELECTOR> or [INPUT d,f] to select the input source you want to record.
2Set the recorder to recording mode.
3Start playback of the source you want to record.
•Recording will start in sync with the playback operation of the source.
Getting started Basic connections Basic operation Advanced connections Advanced operation Troubleshooting Specifications Explanation terms Index
9
