Electrical Requirements

23.Position the cover plate on the switch housing cover and secure by installing the fiber washer and finial nut (supplied) (Figure 14). Proceed to “Electrical Requirements” section.

FINIAL NUT

FIBER WASHER

COVER PLATE

SWITCH

HOUSING

COVER

Figure 14

24.Remove the wire connectors from the blue and white wires in the switch housing. Connect the switch housing blue wire to the blue wire from the switch housing cover/light fixture assembly; connect the switch housing white wire to the white wire from the switch housing cover/light fixture assembly (Figure 15). Secure the wires using the wire connectors previously removed.

WIRE

CONNECTOR

WHITE WIRE	SWITCH
	HOUSING
BLUE WIRE
	LIGHT
	FIXTURE
BLUE
WIRE
WHITE	SPEED CONTROL
WIRE	SWITCH CHAIN

SWITCH HOUSING

Figure 15

25.Pass the speed control switch chain from the switch housing through the chain bushing in the switch housing cover.

26.Make sure all wires and wire connectors are inside the switch housing, then position the switch housing cover on the switch housing so that the 8-32 x 3/8” pan head screws (previously installed) protrude through the keyhole slots in the switch housing cover. Turn the switch housing cover clockwise to engage the slots, then securely tighten the two screws (Figure 16).

NOTE: Be sure the wires are not pinched between the switch housing and the switch housing cover.

SWITCH HOUSING COVER

TIGHTEN TWO 8-32 x 3/8"

PAN HEAD

SCREWS

Figure 16

Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.

The outlet box must be securely anchored and capable of withstanding a load of at least 50 pounds.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support of 50 lbs. or less”, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.

If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture.

!WARNING

Turning off wall switch is not sufficient. To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. All wiring must be in accordance with National and Local codes and the ceiling fan must be properly grounded as a precaution against possible electrical shock.

CF2800BS, CF2800WB, CF2800PW specifications

The Emerson CF2800BS, CF2800PW, and CF2800WB ceiling fans are renowned for their combination of style, performance, and advanced technology, making them excellent choices for both residential and commercial spaces. Each model features a sleek contemporary design that seamlessly integrates into a variety of decor styles. With an emphasis on providing exceptional airflow, these fans not only enhance comfort but also contribute to energy savings.

One of the standout features of the CF2800 series is the powerful motor. The high-performance 153mm x 15mm motor delivers efficient airflow, ensuring that even large rooms maintain a comfortable temperature. These fans operate quietly, making them perfect for bedrooms, living rooms, or offices where noise reduction is a priority.

The CF2800BS model boasts a beautiful brushed steel finish, adding an element of modern elegance to any space. It is equipped with five blades, designed for optimized air circulation, and includes an integrated light fixture that enhances illumination in the room.

The CF2800PW model offers a pristine white finish, making it an ideal choice for lighter spaces or traditional aesthetics. This model also features five blades and includes the same high-performing motor found in the other variants, ensuring consistency in performance across the series.

The CF2800WB stands out with its black walnut finish, perfect for creating a warm ambiance in indoor areas. The rich wood tone adds warmth and character while keeping functionality at the forefront. Like its counterparts, it features five meticulously designed blades to maximize airflow efficiency.

Technology integration is a significant highlight of the CF2800 series. Each fan is equipped with a reversible motor, allowing for both summer and winter modes. This feature helps in circulating cool air during hot months and redistributing warm air during colder months, enhancing HVAC efficiency.

Installation is made easy with included mounting hardware, ensuring that homeowners and professionals alike can quickly set up the fans without hassle. The combination of style, advanced airflow technology, energy efficiency, and versatile design makes the Emerson CF2800 series a preferred choice for those seeking both functionality and aesthetic appeal in their ceiling fans.