Sears 73328, 73321 Electrical Disconnect, Seal the Openings, Check Ignition of Surface Burners

Page 8

Usage Situations Where Appliance Power Cord

Will Be Disconnected FREQUENTLY:

Do not use an adapter plug in these situations

because disconnecting of the power cord places undue strain on the adapter and leads to eventual fail-

ure of the adapter ground terminal The customer should have the two-prong waft receptacle replaced with a three-prong (grounding) receptacle by a qualF fled electrician before using the appliance.

The installation of appliances designed for mobile home installation must conform with the Manufactured

Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or, when such standard is not applicable, the Standard for Manufactured Home Installations, lat-

est edition (Manufactured Home Sites, Communities and Set-Ups), ANSt A225.1, latest edition, or with local code&

Electrical Disconnect

1. Locate disconnect

plug at left rear of burner box on the

range back.

2. Pinch sides of con-

nector and pull out of range back.

Step 4

Seal the Openings

Seal any openings in the wall behind the range and in the floor under the range when hookups are completed.

Step 5

Check Ignition of Surface Burners

Operation of all cooktop and oven burners should be checked after range and gas supply lines have been carefully checked for leaks..

Select a top burner knob and simultaneously push in and turn to LITE position. You will hear a snapping sound indicating proper operation of the spark mod- ule. Once the air has been purged from the supply lines, burners should light within 4 seconds. After

burner lights, rotate knob out of the LITE position. Try each burner in succession until all burners have been checked..

Quality of Flames:

The combustion quality of burner flames needs to be determined visually.

(A) Yellow flames-- Call for service

(B) Yellow tips on outer cones--

Normal for LP gas

(C) Soft blue flames-- Normal for natural gas

•If burner flames look like (A), call for service. Normal burner flames should look like (B) or (C), depending on the type of gas you use.

°With LP gas, some yellow tipping on outer cones is normal.

Check ngnition of Oven Burner

Your oven is designed to operate quietly and automati- cally. To operate the oven, turn the OVEN SET knob to BAKE and OVEN TEMP knob to 350°R After 30-60

seconds, the oven burner will ignite and burn until the set temperature is reached. The oven burner will con- tinue to cycle on and off as necessary to maintain the

oven at the temperature indicated by the OVEN TEMP knob.

The oven requires electrical power to operate. The oven cannot be lit during a power outage. Gas will not flow unless the glow bar is hot.

If the oven is in use when a power outage occurs, the oven burner will shut off and cannot be re-lit until

power is restored..

(continued next page)

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents KenmoreMANUAL Models 7331 1 73321 73318Contents INSTALLATiON iNSTRUCTiONS Before YOU BeginRmportant Safety iNSTRUCTIONS Additional Materials YOU MAY Need Normal iNSTALLATiON Steps Provide Adequate Gas SupplyConnect the Range to Gas Gas Pipe and Electric Outlet LocationsInstallation Unstructions coothued Electrical ConnectionsElectrical Requirements Extension Cord CautionsElectrical Disconnect Seal the OpeningsCheck Ignition of Surface Burners Check ngnition of Oven BurnerBroil and Oven Burner Installation instructions coot uedAir Adjustment Shutters Step ? Leveling the RangeInstalling the Anti-Tip Device MnstaHUationinstructionsHOW to Convert the Range for USE WiTH LP GAS Convert The Pressure Regulator For LP GasConvert Surface Burners For LP Gas Oo.o,o.o.o,p,ooo. oopAdjusting The Air Adjustment Shutters For LP Gas For LP GasConvert The Oven Burner Orifice Oven BurnerIMPORTANT Safety mNSTRUCTBONS Read all instructions before using this applianceImportant SAFE3= I Instructions Surface CookingAlways turn surface burner to OFF before removing cookware Important Safe Nstructuons oont o.e Save These mNSTRUCTRONSFeature Index See Features of Your RangeFeature Index Surface Cooking Ctock and Timers Automatic Oven TimerClock & Minute Timer At the end of the set time, a buzzer sounds to tellUsing Your Oven Before Using Your OvenOven indicator Light Oven Interior LightOven Vents Oven ShelvesShelf Positions Oven MoistureHow to Set Your Range for Baking Common Baking Problems Possible SolutionsBaking PreheatingBaking Guide Ood BreadDual Shelf Cooking RoastingFrozen Roasts Use tongs to turn meat over--pierced meat loses juices How to BroilBroiling Tips How to Set Oven for Cleaning Operating the Self-Cleaning OvenBefore a Self-Cleaning Cycle Follow These Steps after Self-Cleaning Questions and AnswersCan I use commercial oven cleaners on any Sound I hear during cleaningLift-up Cooktop Burner GratesAir Vents Outer Painted FinishTo replace the cover Oven Lamp RepRacementTo remove Care and CReaning Lift-Off Oven DoorBroiler Pan & Rack Range Top BurnersCleaning Guide Part Materials to USEMinor Adjustments You Can Make Oven Thermostat AdjustmentAir Adjustment Shutters Broil and Oven BurnerFlow Air Burner, loosenQuestions? Use This ProbUern SoWverPage Page Page PemelanaoGlassPartsWarranty MA MA AmericasBest SellingAppliance BrandPs.,otherthan W MA MA Sold by SEARS, Roebuck and CO., Chicago, IL
Top Page Image Contents