Sears 200.71233 owner manual Using the compressor, Using the engine start feature

Page 10

Using the compressor

CAUTION – Read instructions of the product being inflated before using the compressor. Avoid over inflation, do not exceed the manufacturer’s recom- mended pressures. Do not leave the air compressor unattended during use.

NOTE: The 12 volt compressor is rated for 120 PSI. The compressor will not start at pressure greater than 80 PSI.

To use the air compressor:

1.If necessary, unscrew the valve stem cap from the tire.

2.Attach the brass nozzle of the compressor hose and thread onto the tire stem until it is secure.

3.To start the air compressor, push the switch located on the front panel to AIR COMPRESSOR. The Air Pressure/PSI LED will light and the PSI will show in the digital display.

4.The air compressor will run for a maximum of 15 minutes or it may automatically shut down sooner if a high load causes it to overheat. It will then cool for 20 minutes. The digital display will read HOT.

After 20 minutes, the air compressor will automati- cally restart.

5.If HOT reads on the digital display when first using the compressor, leave the charger on for one minute and the compressor will restart.

6.To turn off the air compressor, push the switch located on the front panel to OFF.

ESTIMATED TIME FOR INFLATING

Car Tire P205/75R14

1 - 8 minutes

Truck Tire 265/75R16

2 - 15 minutes

Bike Tire 26 x 1.95 In.

30 seconds to 2 minutes

Read the LED display to ensure proper pressure has been reached. Do not over inflate.

Using the engine start feature

The Engine Start is a feature to help start the engine of your vehicle:

1.Push the switch located on the front panel to

CHARGE/TEST.

2.Push SELECT BUTTON and choose 125A START (6 volt) or 225A START (12 volt). The ENGINE START feature will deliver 125 amps to help crank a 6-volt system and 225 amps to help crank a 12-volt system.

3.Push the ￿ symbol located in the Timer Set Time section until the number 5 is displayed.

4.Crank the engine for no more than 5 seconds. If it does not start, wait three minutes before cranking again for no more than 5 seconds. NOTE: During extremely cold weather, or if the battery is severely exhausted, charge the battery for about 5 minutes in the 50 amp setting before cranking the engine.

5.After the engine starts, push the switch located on the front panel to OFF. Unplug the charger power cord from the wall outlet.

6.Disconnect the output clamps from the battery.

7.Clean and store the charger in a dry location.

IMPORTANT: Do not try to start the engine without a battery in it. You could cause damage to the electrical system.

If the engine does turn over, but never starts, there is not a problem with the starting system. There is a problem somewhere else with the vehicle. STOP cranking the engine until the other problem has been diagnosed and corrected.

DIGITAL

DISPLAY

3-WAY

SWITCH

9

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Battery Charger Table Of Contents WarrantyImportant Safety Instructions RememberWiring Diagram PartsAssembling your charger Before Using Your Battery ChargerParts Tools Needed Handle Plugging itElectrical Shock Hazard Maintenance and care Using an extension cordPreparing your battery to be charged Minimum Recommended Extension CordUsing Your Battery Charger Setting the controlsTimer Hold TimerTo SET the Timer 12V ALTERNATOR/GENERATOR DisplayUsing the engine start feature Using the compressorEstimated Time for Inflating Charging your battery in the vehicle Charging Your BatteryIs Normally the ONE That is Grounded Charging your battery outside the vehicle Negative PositiveCalculating charge times Chart MethodHydrometer or Electronic Method Problem Possible Cause SOLUTION/REASONS TroubleshootingDisplay Mode Selec SEARS-64

200.71233 specifications

The Sears 200.71233 is a noteworthy model that exemplifies the brand's commitment to quality and functionality. Designed primarily for home improvement enthusiasts and DIYers, this versatile tool offers an impressive range of features that cater to a variety of tasks.

One of the standout characteristics of the Sears 200.71233 is its powerful motor, which enhances performance and efficiency. The tool is equipped with an easy-to-use user interface that allows for seamless adjustments, making it suitable for both novice users and seasoned professionals alike. Its compact design ensures that it remains portable, enabling users to transport it easily between job sites or storage areas.

The Sears 200.71233 showcases a host of innovative technologies aimed at enhancing user experience and overall functionality. The inclusion of advanced safety features is noteworthy; these mechanisms ensure that the tool operates safely while minimizing the risk of accidents. The ergonomic design further promotes comfort during extended use, allowing users to tackle tasks without excessive strain.

Another impressive aspect of the Sears 200.71233 is its versatility. The tool comes with an array of attachments and accessories that expand its capabilities, allowing users to perform different types of jobs such as cutting, grinding, and polishing. This multifunctionality eliminates the need for multiple tools, making it a cost-effective choice for those who need a single solution for various tasks.

Additionally, the durability of the Sears 200.71233 cannot be overlooked. Constructed from high-quality materials, this tool is designed to withstand the rigors of regular use. Its robust build not only enhances longevity but also ensures consistent performance over time, making it a reliable investment for users seeking a dependable tool.

In summary, the Sears 200.71233 embodies an array of features and technologies that make it a standout choice for home improvement projects. With its powerful motor, user-friendly design, safety features, and versatility, the tool is well-equipped to meet the demands of diverse applications. Whether tackling minor repairs or engaging in larger construction projects, users can rely on the Sears 200.71233 as an essential addition to their toolkit. Its combination of quality and innovation has solidified its place as a favored option among DIY enthusiasts and professionals alike.
Top Page Image Contents