Sears 28.7123 operating instructions

Page 11

9.2Attach the Foot: Remove the charger from the packing materials and place upside down on a flat surface. Attach the foot and secure it with the four ¼-20 thread cutting screws provided.

9.3Assemble the Wheels and Axle: Hold the axle upright on the floor or work surface. Then, using a hammer, tap one of the axle caps onto the top end of the axle. Be sure to tap the axle cap on straight. Slide both wheels onto the axle with the recessed hubs facing out as shown. Install the second axle cap.

• 8 •

Image 11

Contents OPERATOR’S Manual Page Table of Contents Page Risk of Explosive Gases Risk of Electric Shock or FirePersonal Precautions Risk of Explosive Gases DC Connection Precautions Charger Location Risk of Explosion Contact with Battery AcidNegative Grounded System Page Grounding and ac power cord connections Assembly instructionsPage Page Ammeter Features/Control PanelSetting the Controls Output Selector SwitchesCharging Manual ModeUsing the Engine Start feature Operating InstructionsCharge Rate Battery SIZE/RATING Charging Time Hours AMPCalculating charge time Moving and Storage Instructions TroubleshootingProblem Possible Cause REASON/SOLUTION Battery may not want Before Returning for Repairs