Sears 28.7123 operating instructions Personal Precautions Risk of Explosive Gases

Page 6

2.PERSONAL PRECAUTIONS

RISK OF EXPLOSIVE GASES.

2.1NEVER smoke or allow a spark or flame in the vicinity of a battery or engine.

2.2Remove personal metal items such as rings, bracelets, necklaces and watches when working with a lead-acid battery. A lead-acid battery can produce a short- circuit current high enough to weld a ring or the like to metal, causing a severe burn.

2.3Be extra cautious to reduce the risk of dropping a metal tool onto the battery. It might spark or short-circuit the battery or other electrical part that may cause an explosion.

2.4Use this charger for charging LEAD-ACID batteries only. It is not intended to supply power to a low voltage electrical system other than in a starter-motor application. Do not use this battery charger for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause injury to persons and damage to property.

2.5NEVER charge a frozen battery.

2.6NEVER overcharge a battery.

2.7Consider having someone close enough by to come to your aid when you work near a lead-acid battery.

2.8Have plenty of fresh water and soap nearby in case battery acid contacts your skin, clothing or eyes.

2.9Wear complete eye and body protection, including safety goggles and protective clothing. Avoid touching your eyes while working near the battery.

2.10If battery acid contacts your skin or clothing, immediately wash the area with soap and water. If acid enters your eye, immediately flood the eye with cold running water for at least 10 minutes and get medical attention right away.

2.11If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO NOT induce vomiting. Seek medical attention immediately.

3.PREPARING TO CHARGE

RISK OF CONTACT WITH BATTERY ACID.

BATTERY ACID IS A HIGHLY CORROSIVE

SULFURIC ACID.

3.1If it is necessary to remove the battery from the vehicle to charge it, always remove the grounded terminal first. Make sure all of the accessories in the vehicle are off to prevent arcing.

3.2Be sure the area around the battery is well ventilated while the battery is being charged.

3.3Clean the battery terminals before charging the battery. During cleaning, keep airborne corrosion from coming into contact with your eyes, nose and mouth. Use baking soda and water to neutralize the battery acid and help eliminate airborne corrosion. Do not touch your eyes, nose or mouth.

3

Image 6
Contents OPERATOR’S Manual Page Table of Contents Page Risk of Electric Shock or Fire Risk of Explosive GasesPersonal Precautions Risk of Explosive Gases Charger Location Risk of Explosion Contact with Battery Acid DC Connection PrecautionsNegative Grounded System Page Assembly instructions Grounding and ac power cord connectionsPage Page Output Selector Switches Features/Control PanelSetting the Controls AmmeterOperating Instructions Manual ModeUsing the Engine Start feature ChargingBattery SIZE/RATING Charging Time Hours AMP Calculating charge timeCharge Rate Troubleshooting Problem Possible Cause REASON/SOLUTIONMoving and Storage Instructions Battery may not want Before Returning for Repairs