Calculating charge times, Chart Method | Sears 200.71231 instruction

Calculating charge times

The Chart Method

Use the following table to more accurately determine the time it will take to bring a battery to full charge. First, identify where your battery fits into the chart.

•Small batteries — motorcycles, garden tractors, etc.

— are usually rated in Ampere Hours (AH). For example: 6 to 12 AH, or 12 to 32 AH.

•Batteries in cars and smaller trucks are usually rated in Reserve Capacity (RC), Cold-Cranking Amps (CCA), or both.

•Marine, or deep-cycle batteries are usually rated in Reserve Capacity (RC).

•NR means that the charger setting is NOT RECOM-

MENDED.

Find your battery’s rating on the chart below and note the charge time given for each charger setting. The times given are for batteries with a 50-percent charge. Add more time for totally discharged batter- ies.

	BATTERY SIZE/RATING					CHARGE RATE/CHARGING TIME - HOURS
	BATTERY SIZE/RATING					2 AMP	40 AMP
						2 AMP	40 AMP
SMALL		Motorcycle, garden		6	- 12 AH	2 - 4	NR
BATTERIES		tractor, etc.		12	- 32 AH	4 - 10	NR
		200	- 315 CCA	40	- 60 RC	11 - 14	30 to 45 min.
CAR/TRUCKS		315	- 550 CCA	60	- 85 RC	14 -18	45 min. to 1 hour
		550	- 1000 CCA	85	-190 RC	18 - 35	1 - 2
MARINE/DEEP CYCLE				80 RC		18	NR
MARINE/DEEP CYCLE				140 RC		27	NR
				140 RC		27	NR
				160 RC		30	NR

				180 RC		33	NR

The Hydrometer or Electronic Method

To find the time needed to fully charge your battery, determine the battery’s charge level with a hydrometer or electronic Percent-of-Charge Tester. The following table will help you convert hydrometer readings to percent of charge values.

SPECIFIC	PERCENT	PERCENT OF
GRAVITY	OF CHARGE	CHARGE NEEDED

1.265	100%	0%

1.225	75%	25%

1.155	25%	75%

1.120	0%	100%

When you know the percent of charge and the Amp Hour (AH) rating of your battery, you can calculate the time needed to bring your battery to a full charge.

To convert Reserve Capacity to Amp Hours, divide Reserve Capacity by 2, and add 16:

Amp Hours = Reserve Capacity + 16

NOTE: The Reserve Capacity can be obtained from the battery specification sheet or the owner's manual.

To calculate time needed for a charge:

•Find the percent of charge needed. (A battery at 50 percent charge that will be charged to 100 percent needs another 50 percent (.50).

•Multiply the Amp Hour rating by the charge needed (.50) and divide by the charger setting (2 or 10 amps).

•Multiply the result by 1.25 and you’ll have the time needed, in hours, to bring the battery to full charge.

•Add one additional hour for a deep-cycle battery.

Example:

Amp Hour Rating x % of charge needed x 1.25 = hours

Charger Setting	of
charge
100 (AH Rating) x .50 (charge needed) x 1.25 =	6.25
40 (Charger Setting)	hours
100 x .50 = 1.25 x 1.25 = 1.5625
40

You would need to charge your 100-Ampere Hour Battery for approximately 1½ hours at the 40-Amp charge rate using the above example.

200.71231 specifications

The Sears 200.71231 is a noteworthy model that combines traditional craftsmanship with modern technology, designed to meet various needs of both hobbyists and professionals. As a versatile tool, it stands out due to its remarkable features, which enhance its functionality and performance.

One of the main characteristics of the Sears 200.71231 is its powerful motor, capable of delivering high performance for various tasks, such as cutting, shaping, and sanding. The motor is engineered to operate at varying speeds, allowing users to adjust the settings according to the material being worked on. This capability ensures precision and control, making it suitable for detailed projects as well as heavier-duty tasks.

Additionally, the design of the Sears 200.71231 prioritizes ergonomics. It features a comfortable grip that minimizes fatigue during prolonged use, making it especially appealing to users who undertake extensive woodworking or crafting projects. The lightweight build also promotes ease of handling, enabling users to maneuver the tool easily without compromising on stability.

In terms of technologies, the Sears 200.71231 incorporates advanced safety features to protect users during operation. These include a built-in safety switch that prevents accidental activation and an adjustable guard that shields users from debris. Such safety considerations reflect the brand's commitment to user experience and well-being.

Furthermore, the Sears 200.71231 is compatible with a wide range of accessories and attachments, making it a highly adaptable tool. Users can easily switch between various blades and elements, catering to distinct tasks without the need for multiple tools. This versatility not only saves space but also enhances cost-effectiveness, as users can invest in one reliable tool rather than a collection of equipment.

Lastly, its durable construction ensures longevity, capable of withstanding the rigors of frequent usage. The Sears 200.71231 is built to resist wear and tear, which translates to less frequent repairs and replacements over time. The model's reliability and performance make it a solid choice for anyone looking to add a robust tool to their collection.

In conclusion, the Sears 200.71231 stands as an exemplary model in its category, featuring a powerful motor, ergonomic design, advanced safety technologies, and remarkable versatility. It addresses the diverse needs of users while ensuring safety and durability, making it a valuable asset for any workshop.