Sears 200.71231 owner manual Using the engine start feature, Maintenance and care

Page 12

Using the engine start feature

Your battery charger can be used to jump-start your car if the battery is low. Follow these instructions on how to use the engine start feature.

1.Set the right-hand OUTPUT SELECTOR switch to the OFF position. Then follow the instructions for connecting the charger to the battery in the section “Charging your battery in the vehicle” see page 8.

2.Once the charger is connected, set the right-hand selector switch to SELECT and set the left selec- tor switch to the 200 AMP START position.

3.Plug the power cord into a grounded AC wall outlet.

4.Crank the engine for no more than five seconds. If the engine does not start, wait four minutes before cranking again.

5.During extremely cold weather, or if the battery is severely exhausted, charge the battery for about five minutes before cranking the engine.

6.If the engine still does not start, charge the battery for five more minutes in the 40 AMP position before cranking it again for five seconds.

7.After the engine starts, unplug the charger power cord from the outlet. Then move the right-hand SELECTOR SWITCH to the OFF

position before disconnecting the battery leads.

IMPORTANT: Do not try to start the engine without a battery in it. You could cause damage to the electrical system.

If the engine does turn over, but never starts up, there is not a problem with the starting system, there is a problem somewhere else with the vehicle. STOP cranking the engine until the other problem has been diagnosed and corrected.

Maintenance and care

A minimal amount of care can keep your battery charger working properly for years.

1.Clean the clamps each time you are finished charging. Wipe off any battery fluid that may have come in contact with the clamps to prevent corrosion.

2.Coil the input and output cords neatly when storing the charger. The cords can be wrapped around the handle of the charger. This will help prevent accidental damage to the cords and charger.

3.Occasional cleaning of the case with a soft cloth will keep the finish shiny and help prevent corro- sion.

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Battery Charger Table Of Contents WarrantyImportant Safety Instructions Help us help youWiring Diagram PartsBefore Using Your Battery Charger To attach the axle assemblyAssembling your charger Parts Tools NeededPlugging it To attach the handleElectrical Shock Hazard Using an extension cord Preparing your battery to be chargedMinimum Recommended Extension Cord Length of Cord, in FeetUsing Your Battery Charger Setting the controlsCharging Your Battery Charging your battery in the vehicleMally the ONE That is Grounded Charging your battery outside the vehicle Chart Method Calculating charge timesHydrometer or Electronic Method Using the engine start feature Maintenance and careTroubleshooting Problem Possible Cause SOLUTION/REASONSSEARS-64

200.71231 specifications

The Sears 200.71231 is a noteworthy model that combines traditional craftsmanship with modern technology, designed to meet various needs of both hobbyists and professionals. As a versatile tool, it stands out due to its remarkable features, which enhance its functionality and performance.

One of the main characteristics of the Sears 200.71231 is its powerful motor, capable of delivering high performance for various tasks, such as cutting, shaping, and sanding. The motor is engineered to operate at varying speeds, allowing users to adjust the settings according to the material being worked on. This capability ensures precision and control, making it suitable for detailed projects as well as heavier-duty tasks.

Additionally, the design of the Sears 200.71231 prioritizes ergonomics. It features a comfortable grip that minimizes fatigue during prolonged use, making it especially appealing to users who undertake extensive woodworking or crafting projects. The lightweight build also promotes ease of handling, enabling users to maneuver the tool easily without compromising on stability.

In terms of technologies, the Sears 200.71231 incorporates advanced safety features to protect users during operation. These include a built-in safety switch that prevents accidental activation and an adjustable guard that shields users from debris. Such safety considerations reflect the brand's commitment to user experience and well-being.

Furthermore, the Sears 200.71231 is compatible with a wide range of accessories and attachments, making it a highly adaptable tool. Users can easily switch between various blades and elements, catering to distinct tasks without the need for multiple tools. This versatility not only saves space but also enhances cost-effectiveness, as users can invest in one reliable tool rather than a collection of equipment.

Lastly, its durable construction ensures longevity, capable of withstanding the rigors of frequent usage. The Sears 200.71231 is built to resist wear and tear, which translates to less frequent repairs and replacements over time. The model's reliability and performance make it a solid choice for anyone looking to add a robust tool to their collection.

In conclusion, the Sears 200.71231 stands as an exemplary model in its category, featuring a powerful motor, ergonomic design, advanced safety technologies, and remarkable versatility. It addresses the diverse needs of users while ensuring safety and durability, making it a valuable asset for any workshop.
Top Page Image Contents