Sears 200.71231 Using an extension cord, Preparing your battery to be charged, AWG* Size of Cord

Page 7

A TEMPORARY adapter may be used to connect the charger to a two-pole outlet if a properly grounded outlet is not available. Use the adapter ONLY until a properly grounded outlet can be installed by a qualified electrician.

WARNING: Improper adapter con- nection can result in electrical shock.

Before using an adapter as illustrated, be certain that the center screw of the outlet plate is grounded. The green colored grounding clip of the adapter must be attached by a metal screw to a properly grounded outlet. If unsure whether outlet is properly grounded, contact a professional electrician. If necessary, replace the original outlet cover screw with a longer one that will secure the grounding clip to the outlet cover and make a ground connection to the grounded outlet.

Using an extension cord

The use of an extension cord is not recommended. If you must use an extension cord, please make sure that you follow these guidelines:

•Make sure the pins on the plug of the extension cord are the same number, size, and shape as those of the plug on the charger.

•Use only 3-conductor (grounded) extension cord when necessary.

•Check that the extension cord is properly wired and in good electrical condition.

•Use the recommended minimum AWG (American Wire Gauge) to be sure that wire size is large enough for the rating of the charger.

MINIMUM RECOMMENDED EXTENSION CORD

Length of Cord, in Feet

25

50

100

150

AWG* Size of Cord

18

14

12

10

*AWG=American Wire Gauge

Preparing your battery to be charged

It is important that you read and follow these guide- lines while you are preparing to charge your battery.

•Make sure that you have a 12 volt lead-acid battery. Clean the battery terminals. Be careful to keep corrosion from getting in or around your eyes.

•If you have a battery with removable cell caps, if required, add distilled water to each cell until the battery acid reaches the level indicated by the manufacturer. This will help purge excessive gases from the cells. Be careful not to overfill. If you have a sealed battery without cell caps, no action is neces- sary. Continue to the next step listed below.

•Take time to read all battery manufacturer’s specific precautions, such as removing or not removing cell caps while charging, and recommended rates of charge.

•Wear safety glasses. See additional "Personal Safety Precautions" on page 2.

•Be sure that the area around the battery is well ventilated while it is being charged. If ventilation is poor, any gases emitted from the battery can be manually blown away by using a piece of cardboard or other non-metallic material as a fan.

•If it is necessary to remove the battery from the vehicle to charge it, always remove the grounded terminal from the battery first. A spark may be caused if all accessories in the vehicle are not completely turned off.

NOTE: A marine battery installed in a boat must be removed and charged on shore.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Battery Charger Warranty Table Of ContentsHelp us help you Important Safety InstructionsParts Wiring DiagramParts Tools Needed Before Using Your Battery ChargerTo attach the axle assembly Assembling your chargerTo attach the handle Plugging itElectrical Shock Hazard Length of Cord, in Feet Using an extension cordPreparing your battery to be charged Minimum Recommended Extension CordSetting the controls Using Your Battery ChargerCharging your battery in the vehicle Charging Your BatteryMally the ONE That is Grounded Charging your battery outside the vehicle Calculating charge times Chart MethodHydrometer or Electronic Method Maintenance and care Using the engine start featureProblem Possible Cause SOLUTION/REASONS TroubleshootingSEARS-64

200.71231 specifications

The Sears 200.71231 is a noteworthy model that combines traditional craftsmanship with modern technology, designed to meet various needs of both hobbyists and professionals. As a versatile tool, it stands out due to its remarkable features, which enhance its functionality and performance.

One of the main characteristics of the Sears 200.71231 is its powerful motor, capable of delivering high performance for various tasks, such as cutting, shaping, and sanding. The motor is engineered to operate at varying speeds, allowing users to adjust the settings according to the material being worked on. This capability ensures precision and control, making it suitable for detailed projects as well as heavier-duty tasks.

Additionally, the design of the Sears 200.71231 prioritizes ergonomics. It features a comfortable grip that minimizes fatigue during prolonged use, making it especially appealing to users who undertake extensive woodworking or crafting projects. The lightweight build also promotes ease of handling, enabling users to maneuver the tool easily without compromising on stability.

In terms of technologies, the Sears 200.71231 incorporates advanced safety features to protect users during operation. These include a built-in safety switch that prevents accidental activation and an adjustable guard that shields users from debris. Such safety considerations reflect the brand's commitment to user experience and well-being.

Furthermore, the Sears 200.71231 is compatible with a wide range of accessories and attachments, making it a highly adaptable tool. Users can easily switch between various blades and elements, catering to distinct tasks without the need for multiple tools. This versatility not only saves space but also enhances cost-effectiveness, as users can invest in one reliable tool rather than a collection of equipment.

Lastly, its durable construction ensures longevity, capable of withstanding the rigors of frequent usage. The Sears 200.71231 is built to resist wear and tear, which translates to less frequent repairs and replacements over time. The model's reliability and performance make it a solid choice for anyone looking to add a robust tool to their collection.

In conclusion, the Sears 200.71231 stands as an exemplary model in its category, featuring a powerful motor, ergonomic design, advanced safety technologies, and remarkable versatility. It addresses the diverse needs of users while ensuring safety and durability, making it a valuable asset for any workshop.
Top Page Image Contents