It is importantto understandyour charger'srequirements.This section will tell you
about your charger'selectrical requirementsand how to prepare a battery for charging.
ASSEMBLINGYOURCHARGER
Included with your battery charger are two
cord wrap posts for storage of the clamp cables.
To install, align the three tabs to corre- spond with the three receptacles and push until you hear a snap.
Wrap clamp cord after unplugging the
power cord and store your charger in a[_
PLUGGING IT IN
WARNING: Electrical Shock Hazard. Be sure that the power cord fits properly into the outlet. If not, have a qualified technician install a proper outlet. Never alter the AC cord or plug provided.
Improper connection can result in electrical shock.
Your charger requires a 120V receptacle installed according to all local codes and ordinances.
USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension cord, please make sure that you follow these guidelines:
•Make sure that the pins on charger's power cord fit firmly into the extension cord, and that the extension cord fits firmly into the receptacle.
•Check that the extension cord is
properly wired and in good electrical condition.
Make sure that the wire size is large enough for its length and for the AC
ampere rating as specified in the chart below.
i_iii!iiiiiii!!iiiiiiiiiiiii iifi i | i ¸ i il _ | iiiiiii | :_ | i¸i | iii_ |
Length of Cord, in Feet | 25 | 50 | 100 | 150 | |
AWG* Size of Cord | 18 | 16 | 12 | 10 | |
"AWG=AmericanWireGauge |
|
|
|
| |
5