Your battery charger can be used to jump start your car if the battery is low. Follow these instructionson how to use the ENGINE START feature.
1.Connectthechargerto the batteryand vehicle as instructedin the "Charging your battery"sectionon page8.
2.Setthe right handSELECTOR SWITCHon ENGINESTART.
,Crank the engine for no more than 5 seconds. If it does not start, wait at least 4 minutes before cranking again. In extreme cold or if the battery is severely discharged, charge the battery in the 10 amp position for about 5 minutes before cranking the engine.
4. After the engine starts, unplug the
charger power cord from the AC outlet. Then disconnect the charger from the battery.
IMPORTANT: Do not try to start the engine without a battery in it. You could cause damage to the electrical system.
If the engine does turn over, but never starts up, there is no problem with the starting system, but there is a problem somewhere else in the vehicle. STOP cranking the engine until the other problem has been identified and corrected.
10