Emerson CF990VNB00, CF990BS00 owner manual Lower Head Screw Housing

How to Put Your Ceiling Fan Together (continued)

11.Remove one #8-32 x 10mm serrated head screw from the fan motor housing (reserve for later use). Loosen the other two screws to assemble the lower housing to the fan motor housing (Figure 9).

12.Position the lower housing onto the fan motor assembly, aligning each of the the three holes. Attach the lower housing to the fan motor assembly using the three #8-32 x 10mm serrated head screws. Rotate the lower housing to securely tighten by engaging the screws in the two key hole slots (Figure 9).

NOTE: Make sure wires are not pinched between fan motor assembly and lower housing.

13.Attach the white wire connector from the ceiling fan to the white wire connector of the light kit assembly (Figure 10). Connect the black wire connector from the ceiling fan to the black wire connector of the light kit assembly.

14.Remove one of the one of the three screws in the lower housing and loosen the remaining two screws (Figure 11).

NOTE: Make sure all wires and connector are tucked under the light kit assembly and not pinched between light kit assembly and lower housing.

15.Position the light kit assembly onto the lower housing, aligning each of the the three holes. Attach the light kit assembly to the lower housing, using three #8-32 x 10mm serrated head screws. Rotate the light kit assembly to securely tighten by engaging the screws in the two key hole slots (Figure 11).

#8-32 x 10mm

SERRATED HEAD SCREWS (3)

LOWER HOUSING

Figure 9

LIGHT KIT ASSEMBLY

LIGHT KIT ASSEMBLY WHITE

WIRE CONNECTOR

CEILING FAN WHITE WIRE

CONNECTOR

CEILING FAN BLACK WIRE

CONNECTOR

LIGHT KIT ASSEMBLY BLACK

WIRE CONNECTOR

Figure 10

	#8-32 x 10mm SERRATED
LOWER	HEAD SCREW (3)
HOUSING	LIGHT KIT ASSEMBLY

Figure 11

7 Model No.: CF990