Remote Control Procedures, General | Emerson CF990VNB00, CF990BS00

Remote Control Procedures

General

Your Emerson Ceiling Fan/Light Remote Control consists of hand-held transmitter and a receiver which is mounted under the fan ceiling cover. The remote control is designed to separately control your ceiling fan speed and light intensity. There are four push

buttons (., .., ..., ....)	to set the fan speed and turn
the fan off. The light (	) push button turns the light

on and off and controls the light intensity. The blue indicator light will illuminate while any button is pressed, indicating that the battery is good.

The remote control transmitter is powered by two

AAAalkaline batteries (not included). To prevent possible damage if the batteries should leak, be sure to remove the batteries when the control is not to be used for an extended period of time.

Code switches in the transmitter may be set in 32 different positions. If your fan and light go on and off without using your control, you may be getting interference from other remote units such as garage door openers, car alarms or security systems. To remedy this situations, simply change the combination code in your transmitter.

Preset Memory Feature

Your Emerson receiver is equipped with a preset memory feature. If the AC supply to the receiver is powered through a wall switch, when the switch is turned OFF, the control will remember the light intensity and fan speed. When the switch is turned back ON the light and fan will resume operation as they we re prior to the switch being turned OFF.

Installation of Battery

1.Remove the battery cover by pressing firmly below the arrow and sliding the cover off the control (Figure 20).

2.Remove the connector from the battery compartment and install two AAA alkaline batteries.

Setting Operating Frequency of Transmitter

Your remote control transmitter has code switches which must be set in one of 32 possible code combinations. The five levers (numbered 1, 2, 3, 4, and 5) on the switches are factory-set in the ON (up) position. Do not use this setting. Change the switch settings as follows:

1.Slide the five switch levers in the remote control (transmitter) to your choice of ON (up) or down positions. Use a ball-point pen or small screwdriver and slide the levers firmly up or down.

2.The sixth switch marked ON and I is for dimming control of lights: Set switch to ON to allow for dimming of the lights. Set switch to I for no dimming of the lights such as for fluorescent bulbs.

3.Reinstall the transmitter battery cover.

REMOTE CONTROL

LEVERS

					ON
1	2	3	4	5	I

TWO AAA

BATTERIES

		CODE
		SWITCHES
	BATTERY	REMOTE CONTROL
	COMPARTMENT	REMOTE CONTROL
	COMPARTMENT
	COVER

Figure 20

Programming The Receiver

1.Restore electrical power to the branch circuit at the circuit breaker or fuse panel.

2.Turn the wall switch "On".

3.Within 1 minute of restoring electricity, push and

hold the "Off" ( ) button for 3-5 seconds to program the receiver with the transmitter code. If turned on, the fans lights will blink when the code is set.

4.Proceed to the next section to learn how to operate your ceiling fan.

11	Model No.: CF990

CF990VNB00, CF990BS00 specifications

The Emerson CF990VNB00 and CF990BS00 ceiling fans represent a blend of modern aesthetics and functional efficiency, making them ideal choices for any home or office setting. Known for their superior craftsmanship and innovative design, these models are tailored to enhance comfort while complementing the décor of various spaces.

One of the standout features of the Emerson CF990 series is its powerful motor. Equipped with a robust motor, these fans deliver reliable air movement, ensuring that even large rooms maintain a comfortable temperature. The energy-efficient motor design is not only effective but also minimizes energy consumption, making it an environmentally friendly choice.

Both models also showcase a sleek and contemporary design, featuring a variety of finish options to suit diverse tastes. The CF990VNB00 comes with a timeless Venetian Bronze finish, while the CF990BS00 boasts a modern Brushed Steel finish. This versatility allows homeowners to pick a fan that perfectly matches their interior design scheme, whether it’s classic, modern, or transitional.

A particularly noteworthy aspect of the CF990 series is its WhisperWind technology. This technology ensures a silent operation even at high speeds, allowing users to enjoy a breeze without the distracting noise often associated with traditional ceiling fans. This feature makes the fans perfect for bedrooms, living rooms, or any other area where tranquility is desired.

The CF990 fans also come equipped with a user-friendly remote control that allows for easy operation from anywhere in the room. Users can easily change fan speeds, switch between forward and reverse rotation modes, and control the integrated light fixture (available in certain configurations) without having to get up.

Moreover, the CF990 series is designed for easy installation and maintenance. With a straightforward mounting system, these ceiling fans can be installed quickly, even by those with minimal DIY experience. Their durable, high-quality materials ensure longevity, making them a reliable addition to any home.

In summary, the Emerson CF990VNB00 and CF990BS00 ceiling fans combine style, efficiency, and advanced technology to create a product that delivers both comfort and elegance. With features such as a powerful motor, WhisperWind technology, versatile design options, and user-friendly controls, these ceiling fans are a smart investment for enhancing indoor comfort and aesthetic appeal.