Samsung HT-J4550/EN, HT-J4530/EN, HT-J4500/EN manual The Initial Settings Procedure

Settings

The Initial Settings Procedure

•The Home menu will not appear if you do not configure the initial settings.

•The OSD (On Screen Display) may change in this product after you upgrade the software version.

•The access steps may differ depending on the menu you selected.

1.Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Setup Language screen.

2.Press the ▲▼ buttons to select the desired language, and then press the v button.

3.Press the v button to start function setup.

Setup

TV Aspect and Network will be set.

Each setting may be changed later under "Settings"

Start

a Previous " Select

4.The TV Aspect Ratio screen appears. Press the ▲▼ buttons to select a TV aspect ratio, and then press the v button.

You have four choices:

16:9 Original - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and 4:3 pictures (the old, standard format) in 4:3 pillar box format with black bars on the left and right.

16:9 Full - For widescreen TVs. Displays widescreen pictures in their original 16:9 format and expands 4:3 pictures to fill the 16:9 screen.

4:3 Letter Box - For older, standard screen, analogue TVs. Displays 4:3 pictures in full screen and 16:9 pictures in letter box format that retains the 16:9 aspect ratio but puts black bars above and below the picture.

4:3 Pan-Scan- For older, standard screen, analogue TVs. Displays 4:3 pictures in full

screen and 16:9 pictures in Pan-Scan format that fills the screen, but cuts off the left and right sides of the picture and enlarges the middle vertically.

5.The Network - Wired screen appears.

-- If you have a network with dynamic IP addresses - and most people do - select Auto, press the v button, and then go to Step 6.

-- If you have a network with static IP addresses, we suggest you select Skip by pressing the BLUE (D) button. (See page 17)

-- If you have no network, select Skip by pressing the BLUE (D) button. The Initial Settings Complete screen appears, and then the Home screen appears.

✎✎If you skip network setup here or the setup does not work correctly, you can set up the product's network connection later. (See page 17)

Setup Network - Wired

Choose the method to configure Internet Protocol (IP). Please make sure that Ethernet cable is connected.

Auto : Configure IP automatically.

AutoManual

a Previous d Skip < Move " Select

6.The product verifies the network connection and then connects to the network. When

it is done, press the v button. The "Initial settings completed." screen appears, and then the Home screen appears.

Setup Network - Wired

✓MAC Address (d0:66:7b:dc:28:fc)

✓IP Address, Subnet Mask, Gateway, DNS Server

✓Gateway Ping

✓Internet Service Test

Your network is operating properly. If you still have a network problem, contact your network service provider.

OK

" Select

12 - English