Samsung HT-J4530/EN Contents, Getting Started, Connections, Settings, Playing Content, Appendix

Contents

GETTING STARTED

5Accessories

5Speaker Components

6 Front Panel

6 Rear Panel

7 Remote Control

CONNECTIONS

8Connecting the Speakers

10Connecting to a Network Router

11Connecting to a TV and External Devices

SETTINGS

12The Initial Settings Procedure

13The Home Screen at a Glance

13Accessing the Settings Screen

14Settings Menu Functions

17Network Setup

18Upgrading Software

19Setting Up DLNA

Wiring the Main Power Supply Plug (UK Only)

PLAYING CONTENT

20Switching the Source Device

20Playing Commercial Discs

20Playing a Disc with User Recorded Content

21Playing Files on a USB Device

22Controlling Video Playback

24Playing a Pre-Recorded Commercial Audio Disc

24Controlling Music Playback

25Playing Photo Contents

26Listening to the Radio

27Using Bluetooth

29Using the Special Effects Remote Control Buttons

NETWORK SERVICES

30Using BD-LIVE™

30Using DLNA

30Apps

31Using Opera TV Store

APPENDIX

32Additional Information

33Disk and Format Compatibility

38Troubleshooting

41Specifications

42Licences

IMPORTANT NOTICE : The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.

IMPORTANT : The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

`` IMPORTANT : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED

WITH LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

4 - English