![Installing the Speakers on the Tallboy Stand](/images/new-backgrounds/221651/22165117x1.webp)
Installing the Speakers on the Tallboy Stand
*HT-J4530 only - Front Speakers
*HT-J4550 only - Front/Surround Speakers
1.Turn the Stand Base
2.Use the driver to combine the screws on the 3 marked holes.
3.Straighten a supplied speaker wire and put in the hole on the centre of Stand Base.
4.Connect the upper Speaker to the assembled Stand.
1 Stand Base | 2 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
Stand
34
Speaker
Stand
Connections
56
5. Insert a screw clockwise into the hole on the rear of the speaker using a screwdriver. And then connect a speaker cable.
6. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
Speaker Cable Connections
1.Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each bundle to the coloured sticker on the bottom of each speaker.
2.Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of the speaker plugs to the colours of the speaker jacks.
9 - English