12

INTERFACING TO COMPUTERS WITH BNC OUTPUTS

The IN5129A, IN5132A, and IN5133A are special input cables designed for use with workstations and terminals which have BNC video outputs. The chart below describes the input signal compatibility for each of these cables:

Cable / Description

Monochrome

RGsB

RGBS

RGBH&V

IN5129A

4

- BNCs

 

X

X

 

IN5132A

1

- BNC

X

 

 

 

IN5133A

5

- BNCs

 

X

 

X

Installation Procedure - IN5129A / IN5133A

The video signal input to the IN2000 / IN2001 must be terminated into 75 ohms for proper image display. In order to achieve this termination the following installation procedure should be followed:

1. Attach a BNC "T" (1 male, 2 female) to each BNC output connector on the computer.

2. Connect the IN5129A or IN5133A cable to one side of the "T" connectors.

3. Connect the local monitor to the other side of the "T" connectors. If no local monitor is present, use a 75 ohm Male BNC termination plug on the Red, Green, and Blue connectors (TTL sync signals do not require a 75 Ohm terminator).

Installation Procedure - IN5132A

The IN5132A should be connected directly to the computer’s monochrome composite video output. This cable includes an internal 75 ohm termination so the signal should not be split off to a local monitor before feeding it into the IN5132A or a double termination will result. If a local monitor is required, use one of the following methods to split the signal:

Looping Method - If the local monitor has a "Loop Out" connector, connect the monitor directly to the computer video output. Turn the Loop Out termination switch to "75 ohm termination OFF" and connect the IN5132A to the monitor’s Loop Out connector. Distribution Amplifier - use a high resolution distribution amplifier such as the IN2055 to split the signal between the local monitor and the IN5132A / IN2000.

IN2000 / IN2001 OPERATION MANUAL - REV. 2.1 12/11/99

©1996-1997 - INLINE, INC.

Page 14
Image 14
Network Computing Devices IN2000, IN2001 Interfacing to Computers with BNC Outputs, Cable / Description Monochrome

IN2000, IN2001 specifications

Network Computing Devices IN2001 and IN2000 are innovative solutions designed to enhance network performance and the user experience in the realm of enterprise computing. Both devices are tailored to meet the needs of businesses that require reliable, efficient, and scalable network capabilities.

The IN2001 is considered a powerhouse in network computing, boasting advanced processing capabilities that allow for high-speed data transmission. One of its main features is its multi-threaded architecture, which enables it to handle multiple operations simultaneously without compromising on speed or efficiency. This makes the IN2001 suitable for environments with heavy data traffic, such as data centers and corporate networks. The device is equipped with built-in redundancy features, ensuring minimal downtime and increased reliability.

On the other hand, the IN2000 caters to smaller businesses or branch offices that require a balance between performance and affordability. It is designed with a user-friendly interface that simplifies configuration and management, making it accessible for IT teams with varying levels of expertise. The IN2000 supports various mounting options and integrates seamlessly with existing infrastructure, allowing for easy deployment.

Both devices leverage cutting-edge technologies, including advanced routing protocols and security measures. They support IPv6, ensuring compatibility with the latest internet standards and future-proofing the network infrastructure. Additionally, the network computing devices are equipped with robust firewall capabilities, helping to protect sensitive data and prevent unauthorized access.

A distinguishing characteristic of the IN2001 is its high scalability, allowing businesses to expand their networks effortlessly as their needs grow. It supports a wide range of connectivity options, including Ethernet and wireless capabilities, providing flexibility for diverse networking environments.

Conversely, the IN2000 focuses on energy efficiency, employing intelligent power management to reduce operational costs. It is designed to be eco-friendly, minimizing its carbon footprint while maintaining optimal performance levels.

In summary, both the IN2001 and IN2000 serve as critical components in modern networking solutions, addressing the unique needs of different business environments. Their combination of performance, versatility, and security makes them ideal choices for organizations looking to enhance their network infrastructure in an ever-evolving digital landscape.