8

INTERNAL CONTROLS

The IN2000 and IN2001 have been designed with several controls which may be used by qualified technicians to adjust specialized signal parameters. These controls, consisting of 10 dip switches and one adjustment pot, are infrequently used and do not require adjustment for normal daily operation. For convenience, the IN2001 has been designed with two access slots in the bottom of the unit so the case does not need to be opened to change the dip switches and adjustment pot. To access these controls on the IN2000 follow the procedure listed below.

CAUTION: Any adjustment of internal controls on the IN2000 must only be carried out by qualified technicians. The interface case must be opened to adjust these controls and extreme care must be taken to avoid static shock to the internal components and/or damage to the pins which connect the top and bottom circuit boards.

The following procedure may be used to access the IN2000 internal controls.

1.Remove power from the IN2000.

2.Remove the screw on the bottom of the unit and lift the top cover off. The top cover must be lifted straight up, remaining absolutely parallel to the bottom half of the interface in order to avoid bending the pins on the pin blocks.

3.Locate the desired dip switches or control pot and gently adjust as required using a small plastic "tweeker" tool. See Pages 9 & 10 for details on these controls.

4.Replace the top cover. The interface end panels fit into slots in the top case and will act as a guide, insuring that the pins and sockets on the top and bottom boards line up properly. Once the two halves have been rejoined, tighten the case screw.

The drawing below diagrams the positions of the dip switches and internal control pot on the IN2000.

IN2000 Internal View - Bottom Board

IN2000 / IN2001 OPERATION MANUAL - REV. 2.1 12/11/99

©1996-1997 - INLINE, INC.

Page 9 Page 11
Page 10
Image 10
Network Computing Devices IN2001 operation manual IN2000 Internal View Bottom Board, Internal Controls
Page 9 Page 11

IN2000, IN2001 specifications

Network Computing Devices IN2001 and IN2000 are innovative solutions designed to enhance network performance and the user experience in the realm of enterprise computing. Both devices are tailored to meet the needs of businesses that require reliable, efficient, and scalable network capabilities.

The IN2001 is considered a powerhouse in network computing, boasting advanced processing capabilities that allow for high-speed data transmission. One of its main features is its multi-threaded architecture, which enables it to handle multiple operations simultaneously without compromising on speed or efficiency. This makes the IN2001 suitable for environments with heavy data traffic, such as data centers and corporate networks. The device is equipped with built-in redundancy features, ensuring minimal downtime and increased reliability.

On the other hand, the IN2000 caters to smaller businesses or branch offices that require a balance between performance and affordability. It is designed with a user-friendly interface that simplifies configuration and management, making it accessible for IT teams with varying levels of expertise. The IN2000 supports various mounting options and integrates seamlessly with existing infrastructure, allowing for easy deployment.

Both devices leverage cutting-edge technologies, including advanced routing protocols and security measures. They support IPv6, ensuring compatibility with the latest internet standards and future-proofing the network infrastructure. Additionally, the network computing devices are equipped with robust firewall capabilities, helping to protect sensitive data and prevent unauthorized access.

A distinguishing characteristic of the IN2001 is its high scalability, allowing businesses to expand their networks effortlessly as their needs grow. It supports a wide range of connectivity options, including Ethernet and wireless capabilities, providing flexibility for diverse networking environments.

Conversely, the IN2000 focuses on energy efficiency, employing intelligent power management to reduce operational costs. It is designed to be eco-friendly, minimizing its carbon footprint while maintaining optimal performance levels.

In summary, both the IN2001 and IN2000 serve as critical components in modern networking solutions, addressing the unique needs of different business environments. Their combination of performance, versatility, and security makes them ideal choices for organizations looking to enhance their network infrastructure in an ever-evolving digital landscape.
Top Page Image Contents