Samsung UE40C7000WKXXU, UE55C7700WSXXN manual Connecting to a Wired Network, Network Connection

Advanced Features

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

¦¦ Connecting to a Wired Network

You can attach your TV to your LAN using cable in three ways:

yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat 5 cable. See the diagram below.

		TV Rear Panel
The Modem Port on the Wall	External Modem	ANT 2 IN	ANT 2 IN
	(ADSL / VDSL / Cable TV)	(SATELLITE)	(AIR/CABLE)
		LAN Adapter
Modem Cable	LAN Cable

yy You can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected to an external modem. Use Cat 5 cable for the connection. See the diagram below.

			TV Rear Panel
The Modem Port on the Wall			ANT 2 IN	ANT 2 IN
	External Modem
		IP Sharer	(SATELLITE)	(AIR/CABLE)
(ADSL / VDSL / Cable TV)
		(having DHCP server)
			LAN Adapter
Modem Cable	LAN Cable	LAN Cable

yy Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall outlet is attached to a modem or router elsewhere in your house.

TV Rear Panel

The LAN Port on the Wall

LAN Cable

ANT 2 IN	ANT 2 IN
SATELLITE	)	(		AIR/CABLE

LAN Adapter

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are Dynamic Networks.

Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If you have a Windows computer, you can also get these values through your computer.

✎✎ You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses.

30 English