Chauvet DERBY X user service Operating Instructions, Operation

Page 10

4.OPERATING INSTRUCTIONS

Operation

Stand-Alone Mode (Sound-Active):

This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto Mode.

1)Set all dipswitches position to the Off position.

Mode

Dipswitches

Sound Active

10 = Off

2)The unit will react to the low frequencies of music via the internal microphone in Sound Active mode.

3)Use the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity; turning the knob clockwise increases the sensitivity.

Master/Slave Mode (Master Sound):

This mode will allow you to link up to 32 units together without a controller.

1)Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the units. For longer cable runs we suggest a terminator at the last fixture. For more information about terminators, see page 7.

2)Choose a unit to function as the Master. Turn dipswitches to the Master position on the unit. The unit must be the first unit in line. Then simply chain the units together using DMX cable.

Mode

Dipswitches

Master Sound

10 = Off

3)Turn switch to the Slave position on the slave units, and they will react the same as the Master.

Mode

Dipswitches

Slave

1 = On, 10 = On

DMX Mode

This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with DMX, please read the DMX Primer on page 16.

1)Set the dipswitches to DMX mode.

Mode

Dipswitches

DMX

10 = On

2)Connect a DMX controller to the fixture.

3)Set the start address according to standard binary code.

a.Note: If you are unfamiliar with DMX addressing, we suggest you refer to the section on DMX Primer.

Derby X™ User Manual

10

7/14/2008 1:27 PM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Derby Table of Contents Unpacking Instructions What is includedAC Power Contact UsSafety Instructions Features DMX Channel SummaryFixture Linking Fuse ReplacementDMX Data Cable Cable Connectors Setting up a DMX Serial Data LinkPIN to 5-PIN Conversion Chart Orientation MountingRigging Stacking Operating Instructions OperationDMX Channel Values Channel Value FunctionSetting the Starting Address OFFDMX Quick Reference Chart DMX Address Quick Reference ChartBlow-out Diagram General Troubleshooting Symptoms Possible SolutionsTechnical Support DMX PrimerReturns Procedure General MaintenanceClaims 14/2008 127 PM Technical Specifications Power14/2008 127 PM

DERBY X specifications

The Chauvet Derby X is a dynamic lighting fixture designed for both professional and amateur lighting enthusiasts. Known for its versatility and powerful performance, the Derby X is a favorite among DJs, event planners, and live performers looking to create vibrant and engaging light displays.

One of the standout features of the Derby X is its dual rotating beams, which produce captivating multi-colored projections that can fill any venue with excitement. The fixture is equipped with 8 LED RGB (red, green, blue) lights that allow for a broad spectrum of color mixing. This capability enables users to achieve stunning visual effects that can enhance any atmosphere, be it a dance floor or a stage performance.

The Derby X incorporates advanced technologies to ensure ease of use and flexibility. It can be operated in multiple modes including standalone, sound activation, and DMX control. Users can easily connect multiple fixtures together in a master/slave configuration for synchronized lighting effects, adding an extra layer of coherence to an event's visual presentation.

Another significant characteristic of the Derby X is its user-friendly interface. With intuitive controls, even those with limited experience in programming lights can quickly set up and operate the fixture. The inclusion of a built-in microphone enables the light to react to music, allowing for spontaneous and rhythm-based performances that can captivate audiences.

The design of the Chauvet Derby X is both robust and portable, making it suitable for venues of all sizes. Its lightweight construction ensures that it is easy to transport and set up, while its durable build ensures it can withstand the rigors of road use.

Chauvet places a strong emphasis on energy efficiency, and the Derby X is no exception. The fixture uses highly efficient LED technology, which not only reduces power consumption but also extends the life of the light source. This makes it an economical choice for venues that frequently utilize lighting effects.

In summary, the Chauvet Derby X is a powerful and flexible lighting fixture that offers a plethora of features designed to enhance the visual experience of any event. With its combination of vibrant LED colors, advanced control options, and sturdy design, it is an essential tool for anyone looking to create enthralling lighting displays. Whether for a club, concert, or an intimate gathering, the Derby X is sure to elevate the ambiance and captivate audiences.
Top Page Image Contents