Chauvet DERBY X user service Mounting, Orientation, Rigging

Page 8

Master/Slave Fixture Linking

1.Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture.

2.Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then, proceed to connect from the output as stated above to the input of the following fixture and so on.

Often, the setup for Master-Slave and Standalone operation requires that the first fixture in the chain be initialized for this purpose via either settings in the control panel or DIP- switches. Secondarily, the fixtures that follow may also require a slave setting. Please consult the “Operating Instructions” section in this manual for complete instructions for this type of setup and configuration.

Slave

Slave

Master

Mounting

ORIENTATION

This fixture may be mounted in any safe position provided there is adequate room for ventilation.

RIGGING

It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs.

When selecting installation location, take into consideration lamp replacement access and routine maintenance.

Safety cables must always be used.

Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.

Hanging Clamp

Note!

Clamp is sold separately.

Derby X™ User Manual

8

7/14/2008 1:27 PM

Image 8
Contents Derby Table of Contents What is included AC PowerUnpacking Instructions Contact UsSafety Instructions Features DMX Channel SummaryDMX Data Cable Fuse ReplacementFixture Linking PIN to 5-PIN Conversion Chart Setting up a DMX Serial Data LinkCable Connectors Rigging MountingOrientation Stacking Operating Instructions OperationDMX Channel Values Channel Value FunctionSetting the Starting Address OFFDMX Quick Reference Chart DMX Address Quick Reference ChartBlow-out Diagram General Troubleshooting Symptoms Possible SolutionsTechnical Support DMX PrimerClaims General MaintenanceReturns Procedure 14/2008 127 PM Technical Specifications Power14/2008 127 PM

DERBY X specifications

The Chauvet Derby X is a dynamic lighting fixture designed for both professional and amateur lighting enthusiasts. Known for its versatility and powerful performance, the Derby X is a favorite among DJs, event planners, and live performers looking to create vibrant and engaging light displays.

One of the standout features of the Derby X is its dual rotating beams, which produce captivating multi-colored projections that can fill any venue with excitement. The fixture is equipped with 8 LED RGB (red, green, blue) lights that allow for a broad spectrum of color mixing. This capability enables users to achieve stunning visual effects that can enhance any atmosphere, be it a dance floor or a stage performance.

The Derby X incorporates advanced technologies to ensure ease of use and flexibility. It can be operated in multiple modes including standalone, sound activation, and DMX control. Users can easily connect multiple fixtures together in a master/slave configuration for synchronized lighting effects, adding an extra layer of coherence to an event's visual presentation.

Another significant characteristic of the Derby X is its user-friendly interface. With intuitive controls, even those with limited experience in programming lights can quickly set up and operate the fixture. The inclusion of a built-in microphone enables the light to react to music, allowing for spontaneous and rhythm-based performances that can captivate audiences.

The design of the Chauvet Derby X is both robust and portable, making it suitable for venues of all sizes. Its lightweight construction ensures that it is easy to transport and set up, while its durable build ensures it can withstand the rigors of road use.

Chauvet places a strong emphasis on energy efficiency, and the Derby X is no exception. The fixture uses highly efficient LED technology, which not only reduces power consumption but also extends the life of the light source. This makes it an economical choice for venues that frequently utilize lighting effects.

In summary, the Chauvet Derby X is a powerful and flexible lighting fixture that offers a plethora of features designed to enhance the visual experience of any event. With its combination of vibrant LED colors, advanced control options, and sturdy design, it is an essential tool for anyone looking to create enthralling lighting displays. Whether for a club, concert, or an intimate gathering, the Derby X is sure to elevate the ambiance and captivate audiences.