Chauvet DERBY X user service Setting up a DMX Serial Data Link, Cable Connectors

Page 7

CABLE CONNECTORS

Cabling must have a male XLR connector on one end and a female XLR connector on the other end.

 

DMX connector

 

 

configuration

 

 

 

COMMON

 

1

DMX +

INPUT

3

 

 

2

DMX -

 

 

 

1

Resistance 120

 

3

ohm 1/4w

 

2

between pin 2

 

(DMX -) and pin

 

 

 

 

3 (DMX +) of the

1

OUTPUT

 

3

 

2

Termination reduces signal errors. To

avoid signal transmission problems

and interference, it is always advisable to connect a DMX signal terminator.

CAUTION Do not allow contact between the common and the fixture’s chassis ground. Grounding the common can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm meter to verify correct polarity and to make sure the pins are not grounded or shorted to the shield or each other.

3-PIN TO 5-PIN CONVERSION CHART

Note!

If you use a controller with a 5 pin DMX output connector, you will

 

need to use a 5 pin to 3 pin adapter. CHAUVET Model No: DMX5M, or

 

DMX5F.

 

The chart below details a proper cable conversion:

3PIN TO 5 PIN CONVERSION CHART

Conductor

3 Pin Female (output)

5 Pin Male (Input)

Ground/Shield

Pin 1

Pin 1

Data ( - ) signal

Pin 2

Pin 2

Data ( + ) signal

Pin 3

Pin 3

Do not use

 

Do not use

Do not use

 

Do not use

Setting up a DMX Serial Data Link

1.Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the controller.

2.Connect the end of the cable coming from the controller which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector.

3.Then, proceed to connect from the output as stated above to the input of the following fixture and so on.

CHAUVET Certified DMX Data Cables

Order Code

Description

DMX1.5

DMX Cable 1.5m/4.9ft

DMX4.5

DMX Cable 4.5m/14.8ft

DMX10

DMX Cable 10m/32.8ft

Universal DMX Controller

This drawing provides a general illustration of the DMX Input/Output panel of a lighting fixture.

Continue the link

Derby X™ User Manual

7

7/14/2008 1:27 PM

Image 7
Contents Derby Table of Contents Contact Us What is includedAC Power Unpacking InstructionsSafety Instructions DMX Channel Summary FeaturesFixture Linking Fuse ReplacementDMX Data Cable Cable Connectors Setting up a DMX Serial Data LinkPIN to 5-PIN Conversion Chart Orientation MountingRigging Stacking Operation Operating InstructionsChannel Value Function DMX Channel ValuesOFF Setting the Starting AddressDMX Address Quick Reference Chart DMX Quick Reference ChartBlow-out Diagram Symptoms Possible Solutions General TroubleshootingDMX Primer Technical SupportReturns Procedure General MaintenanceClaims 14/2008 127 PM Power Technical Specifications14/2008 127 PM

DERBY X specifications

The Chauvet Derby X is a dynamic lighting fixture designed for both professional and amateur lighting enthusiasts. Known for its versatility and powerful performance, the Derby X is a favorite among DJs, event planners, and live performers looking to create vibrant and engaging light displays.

One of the standout features of the Derby X is its dual rotating beams, which produce captivating multi-colored projections that can fill any venue with excitement. The fixture is equipped with 8 LED RGB (red, green, blue) lights that allow for a broad spectrum of color mixing. This capability enables users to achieve stunning visual effects that can enhance any atmosphere, be it a dance floor or a stage performance.

The Derby X incorporates advanced technologies to ensure ease of use and flexibility. It can be operated in multiple modes including standalone, sound activation, and DMX control. Users can easily connect multiple fixtures together in a master/slave configuration for synchronized lighting effects, adding an extra layer of coherence to an event's visual presentation.

Another significant characteristic of the Derby X is its user-friendly interface. With intuitive controls, even those with limited experience in programming lights can quickly set up and operate the fixture. The inclusion of a built-in microphone enables the light to react to music, allowing for spontaneous and rhythm-based performances that can captivate audiences.

The design of the Chauvet Derby X is both robust and portable, making it suitable for venues of all sizes. Its lightweight construction ensures that it is easy to transport and set up, while its durable build ensures it can withstand the rigors of road use.

Chauvet places a strong emphasis on energy efficiency, and the Derby X is no exception. The fixture uses highly efficient LED technology, which not only reduces power consumption but also extends the life of the light source. This makes it an economical choice for venues that frequently utilize lighting effects.

In summary, the Chauvet Derby X is a powerful and flexible lighting fixture that offers a plethora of features designed to enhance the visual experience of any event. With its combination of vibrant LED colors, advanced control options, and sturdy design, it is an essential tool for anyone looking to create enthralling lighting displays. Whether for a club, concert, or an intimate gathering, the Derby X is sure to elevate the ambiance and captivate audiences.