Canon CR-DA1 operation manual Please Note

Page 2

PLEASE NOTE

1.In no event will Canon be liable for direct or indirect consequential damage arising out of the use of this product.

2.The CR-DA1 system has been approved by UL and GM with the EOS 030 digital camera powered by a battery. If you wish to instead use AC power to operate the digital camera, please consult Canon representative or distributor.

3.Do not use the built-in strobe tube flashing function of the digital camera when using the digital camera with the retinal camera.

4.Canon reserves the right to change the specifications, configuration and appearance of the product without prior notice.

.&. Follow all warnings and cautions in the CR6-45NM/CR6-45NMf operation manual for safety.

© 2001 Canon Inc.

All rights reserved.

Under copyright laws, this manual may not be copied, in whole or in part, without the written consent of Canon.

Image 2
Contents CR-DA1 Please Note Contents Outline Before PhotographyDescription CD Retinal camera mount @ Strobe timing signal cableLock release button @ Release signal cable Digital camera mountPhotography Turn on the powerAdjust the flash intensity of retinal camera Photography Setting the digital cameraPositioning and Focusing on the retina Installation Attaching the adapter to the retinal cameraAttaching the digital camera to the adapter Before Calling a Service Person Connecting the signal cablesSpecifications Components